Browsing by Author "Gecim, H. Selcuk"

Now showing 1 - 9 of 9

Citation - WoS: 4
Citation - Scopus: 5
Accurate method to calculate noise figure in a low noise amplifier: Quantum theory analysis
(Elsevier Sci Ltd, 2022) Salmanogli, Ahmad; Gecim, H. Selcuk; 182579
In this study, a low-noise amplifier is quantum-mechanically analyzed to study the behavior of the noise figure. The analysis view has been changed from classic to quantum, because using quantum theory produces some degrees of freedom, which may be ignored when a circuit is analyzed using classical theory. For this purpose, the Lagrangian is initially derived by considering the related nonlinearity of the transistor, and then using the Legendre transformation and canonical quantization procedure, the quantum Hamiltonian is derived. As an interesting point of this study, the low-noise amplifier is deliberately considered as two oscillators connecting to each other to share the photonic modes between them; accordingly, the voltage and current as measurable observations and the noise figure as a critical quantity in a low-noise amplifier are theoretically expressed in terms of the oscillator's mean photon number. The main goal of this work is to study quantities such as the noise figure in a sufficient detail using quantum theory. In addition, as an advantage of this theory, one can control and manipulate the noise figure only by manipulation of the oscillator's mean photon number and coupling it between two oscillators. Finally, the circuit is classically designed and simulated to verify the derived results using quantum theory. The comparison results show that there is a partial consistency between the two approaches; as the frequency increases, the noise figure becomes minimized at a particular frequency.
Citation - WoS: 6
Citation - Scopus: 6
Array of nanoparticles coupling with quantum-dot: Lattice plasmon quantum features
(Elsevier Science Bv, 2018) Salmanogli, Ahmad; Gecim, H. Selcuk; 182579
In this study, we analyze the interaction of lattice plasmon with quantum-dot in order to mainly examine the quantum features of the lattice plasmon containing the photonic/plasmonic properties. Despite optical properties of the localized plasmon, the lattice plasmon severely depends on the array geometry, which may influence its quantum features such as uncertainty and the second-order correlation function. To investigate this interaction, we consider a closed system containing an array of the plasmonic nanoparticles and quantum-dot. We analyze this system with full quantum theory by which the array electric far field is quantized and the strength coupling of the quantum-dot array is analytically calculated. Moreover, the system's dynamics are evaluated and studied via the Heisenberg-Langevin equations to attain the system optical modes. We also analytically examine the Purcell factor, which shows the effect of the lattice plasmon on the quantum-dot spontaneous emission. Finally, the lattice plasmon uncertainty and its time evolution of the second-order correlation function at different spatial points are examined. These parameters are dramatically affected by the retarded field effect of the array nanoparticles. We found a severe quantum fluctuation at points where the lattice plasmon occurs, suggesting that the lattice plasmon photons are correlated.
Citation - WoS: 0
Citation - Scopus: 0
Biomedical Device for Early Breast Cancer Detection: Device Performance Improving By Plasmonic-Photonic Mask
(Scitepress, 2019) Meral, Sanem; Yalcinkaya, Ezel; Eroglu, Metin; Salmanogli, Ahmad; Gecim, H. Selcuk; 280089
In this article, a new device to detect breast cancer at an early stage, is presented. The main advantages of the device are its easy operational procedure, portability, high accuracy due to usage of plasmonic-photonic mask and the low cost. In fact, the novelty of the device presented is to apply the new mask called plasmonic-photonic mask for precise analysis of the captured images. In the early stage of the work, a phantom model is employed and the operation of the system is realized. It is shown that the image processing toolbox is safely matched with the device. It should be noted that for the in-vivo imaging, the device should be completed and equipped with a high accuracy charge coupled device (CCD) and laser.
Citation - WoS: 20
Citation - Scopus: 20
Entanglement of Optical and Microcavity Modes by Means of an Optoelectronic System
(Amer Physical Soc, 2019) Salmanogli, Ahmad; Gokcen, Dincer; Gecim, H. Selcuk; 280089
Entanglement between optical and microwave cavity modes is a critical issue in illumination systems. Optomechanical systems are utilized to introduce coupling between the optical and microwave cavity modes. However, due to some restrictions of the optomechanical system, especially sensitivity to the thermal photon noise at room temperature, an alternative optoelectronic system is designed to address the problem. We study a method by which it may be possible to remove the mechanical part of the previous systems to minimize the thermally generated photons. Unlike optomechanical systems, in our system, the optical mode is directly coupled to the microwave cavity mode through the optoelectronic elements without employing any mechanical parts. The utilized approach leads to generating the entangled modes at room temperature. For this purpose, the dynamics of the motion of the optoelectronic system is theoretically derived using the Heisenberg-Langevin equations from which one can calculate the coupling between optical and microwave cavity modes. The direct coupling between the optical and microwave cavity modes is the most important feature and is achieved through the combination of the photodetector and a Varactor diode. Hence, by controlling the photodetector current, that is, the photocurrent, depending on the optical cavity incident wave and the Varactor diode-biased voltage, the coupling between the optical and microwave cavity modes is established. The voltage across the Varactor diode also depends on the generated photocurrent. Consequently, our results show that the coupled modes are entangled at room temperature without the requirement for any mechanical parts.
Citation - WoS: 5
Citation - Scopus: 6
Optical and Microcavity Modes Entanglement by Means of Plasmonic Opto-Mechanical System
(Ieee-inst Electrical Electronics Engineers inc, 2020) Salmanogli, Ahmad; Gecim, H. Selcuk; 182579
In this study, plasmonic opto-mechanical tripartite system is proposed to improve the performance of the traditional tripartite opto-mechanical system. In the new design, significantly, optical cavity and microwave cavity modes are directly coupled to each other. The originality of this work consists in embedding a microsphere in the optical cavity where the plasmon-plasmon interaction between the metal plates generates a plasmon mode inside the optical cavity and changes the electric field distribution. The plasmonic property influences the microsphere electrical properties and interacts with the photonic mode inside the optical cavity by which the microwave cavity properties are also affected through coupling to the optical cavity. Microsphere introduces a capacitor as a function of plasmonic properties that can strongly influence the microwave cavity resonance frequency. That is the feature that we want to utilize to enhance the performance of the system at high temperature. The results show that the optical cavity and microwave cavity modes remain entangled at high temperature. It is contributed to the plasmonic-based capacitor induced by the microsphere which is not affected by the thermally induced photons (noise). It is worth mentioning that the induced noise strongly restricts the traditional tripartite system operated with a wide bandwidth.
Citation - WoS: 5
Citation - Scopus: 5
Plasmonic Effect on Quantum-Dot Photodetector Responsivity
(Ieee-inst Electrical Electronics Engineers inc, 2019) Salmanogli, Ahmad; Gokcen, Dincer; Gecim, H. Selcuk; 280089; 182579
In this paper, we analyze and simulate the plasmonic effect on the quantum-dot photodetector responsivity. For this purpose, a plasmonic-based quantum-dot photodetector is designed in which a few quantum dots are embedded in the hot-spot regions of the plasmonic nanoparticles, wherein a high-intensity localized field is created. Notably, due to the maximum overlapping of the plasmonic field with the quantum dots at the hot spot, some of the optical characteristics of the quantum dot, particularly the spontaneous emission decay rate, are changed. This paper focuses on the engineering of the decay rate, through which we found that the quantum-dot photodetector responsivity is strongly enhanced with the order of 100 times at the visible range. For analyzing the proposed system, we first work on the plasmonic effect of the nanoparticle on the quantum-dot lifetime using the Heisenberg-Langevin equations. It is shown that by embedding the quantum dots at the hot spot of the nanoparticle, the decay rate of the quantum dot is dramatically influenced. In the following, plasmonic-quantum dot system responsivity is theoretically examined using a time-varying perturbation theory. Using this approach is necessary because the spontaneous emission cannot be analyzed with the classical methods. Consequently, it is proved that using plasmonic effect leads to enhanced photodetector responsivity, suggesting that even very small incoming signals are detectable.
Citation - WoS: 7
Citation - Scopus: 7
Plasmonic System as a Compound Eye: Image Point-Spread Function Enhancing by Entanglement
(Ieee-inst Electrical Electronics Engineers inc, 2018) Salmanogli, Ahmad; Gecim, H. Selcuk; Piskin, Erhan; 280089
In this paper, we introduce a plasmonic system that can operate as a compound eye. Based on the advantages mentioned in some previous works for the compound eye, we designed a plasmonic system that contains faraway plasmonic nanoparticles (NPs) that act independently like an ommatidium in the compound eye. This plasmonic system performance is analyzed with full quantum theory by which it is theoretically proved that with the interaction of light with NPs, the scattering light, and generated phonon can be entangled due to the NPs Ohmic loss. Consequently, the quantum states of the system before, after, and during the absorption and scattering of the incident photon, were quantum mechanically subjected. By the introduced theoretical formula and modeling results, it is shown that the plasmonic system can operate similar to the compound eye, if the critical parameters, such as system's focus point, NPs scattering angle, and inter-distance between NPs are suitably designed. More importantly, due to the entanglement between the scattering light and the generated phonon, it is theoretically proved that the point-spread function is improved when the traditional lens in the compound eye is replaced by the plasmonic NPs leading to an enhanced image resolution. Finally, a simple conceptual design of the plasmonic system is presented and then a few contributed modeling results are introduced.
Citation - WoS: 0
Citation - Scopus: 0
Quantum dot transition rate modifying by coupling to lattice plasmon
(Springer, 2023) Hatem, Sude; Hatem, Sude; Salmanogli, Ahmad; Gecim, H. Selcuk; 182579; Elektrik-Elektronik Mühendisliği
In this study, a plasmonic system coupled to a quantum dot is defined to generate the entanglement between two non-simultaneous emitted output modes. The quantum dot with three energy levels creates two different transition rates by which non-simultaneous photons are emitted. Thus, it seems that the entanglement between two emitted modes is forbidden. However, the simulation results show the entanglement between the output modes. It is because the original transition rates of the quantum dot are modified due to the lattice plasmon coupling effect. It means that the effective transition rate affected by the lattice plasmon plays a key role. The lattice plasmon coupling to quantum dot at some locations leads to a simultaneous transition by which the entanglement between output modes is established. The entangled output modes refer to the entangled photons with a specific frequency (e.g., the emission frequency). This unique behavior is theoretically discussed and the results show that using the lattice plasmon can change the transition rates by which the two emitted modes become entangled.
Citation - WoS: 8
Citation - Scopus: 8
Quantum eye: Lattice plasmon effect on quantum fluctuations and photon detection
(Academic Press inc Elsevier Science, 2018) Salmanogli, Ahmad; Gecim, H. Selcuk; 182579
In this work, arrays of plasmonic nanoparticles coupled to a detector are designed and considered as a quantum eye. In the designed system, the plasmonic nanoparticles have a role like an ommatidium in the artificial compound eye; however, the quantum eye ommatidium acts with different functionality. To better understand this system, we analyze it with the full quantum theory, quantize lattice plasmon generated by the array of plasmonic nanoparticles, and finally derive bosonic operators using Heisenberg-Langevin equations. Moreover, we theoretically derive the radiative and non-radiative losses introduced by this system and examine lattice plasmon effect on spontaneous emission of the quantum dot (Purcell factor). The main goal of this article is to investigate the quantum eye's quantum properties such as quantum fluctuations, which is modeled and analyzed by studying the second-order correlation function. This function exhibits a significant bunching as a function of lattice plasmon optical properties. We can easily manipulate and improve the lattice plasmon optical properties, which dramatically depend on the array geometry. Finally, we study the quantum eye photon detection by a quantum measuring approach and show that the lattice plasmon has a strong effect on quantum properties after the one-count process. (C) 2018 Elsevier Inc. All rights reserved.