Bilgilendirme: Sürüm Güncellemesi ve versiyon yükseltmesi nedeniyle, geçici süreyle zaman zaman kesintiler yaşanabilir ve veri içeriğinde değişkenlikler gözlemlenebilir. Göstereceğiniz anlayış için teşekkür ederiz.

Browsing by Author "Ucar, Muhammed"

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    Article
    Effect of Downstream Expansion of a Long-Throated Flume on Flow Properties
    (Gazi Univ, 2021) Hatipoglu, Murat; Gogus, Mustafa; Ucar, Muhammed; 6062; 01. Çankaya Üniversitesi
    Long throated flumes are widely used flow measurement devices that not requiring site-specific level to flow curves and therefore laboratory experiments. In this study, downstream expansion effect of the long throated flumes with rectangular cross section were analysed for the dimensionless parameters derived from Buckingham's pi theorem and some other known hydraulic quantities such as discharge coefficient, approach velocity coefficient, submergence ratio of the flow etc. Therefore, five downstream transitions with different expansion angles were tested. In each test, the critical depth y(c), the flow head at the depth measurement section h(1), minimum required energy dissipater length L-t and the head after hydraulic jump y(2) were measured for both modular and free flow conditions. The relation of hydraulic quantities of calculated dimensionless parameters with relevant parameters; modular limits, approach velocity coefficients and discharge coefficients etc. were graphed to represent the design relationships for long throated flumes.
  • Thumbnail Image
    Article
    Citation - WoS: 1
    Citation - Scopus: 2
    Hydraulics of Circular Bottom Intake Orifices
    (Wiley, 2021) Gogus, Mustafa; Bulut, Muhammed; Ucar, Muhammed; 6062; 01. Çankaya Üniversitesi
    In this study, the hydraulic characteristics of circular bottom intake orifices were investigated in a hydraulic model. The structure diverts the river-flow to a hydroelectric power plant through circular orifices located at the bottom of the channel. In the model, a series of circular holes of various diameters and locations at the bottom of a channel in the form of single and multiple holes were tested for different flowrates and screen angles (theta) to determine the flow diverting capacity of them. Discharges passing through orifices at known locations (x) and diameters (d) and screen slopes (theta) were measured and recorded along with the related main channel flow rates and depths (h). Using the dimensional analysis approach, an expression for the flow rate diverted from the main channel was derived as a function of related parameters, and their variations with each other were presented graphically and empirical equations were determined. Referring to the graphs and empirical equations, one can determine the discharge capacity of single and multiple intake orifices, which is important to calculate the amount of flow to be diverted from the main channel within the ranges of the related parameters used in this study.