Elektrik Elektronik Mühendisliği Bölümü

Permanent URI for this communityhttps://hdl.handle.net/20.500.12416/410

Browse

Now showing 1 - 20 of 24

Citation - WoS: 8
Citation - Scopus: 8
Analysis of Quantum Radar Cross-Section by Canonical Quantization Method (Full Quantum Theory)
(Ieee-inst Electrical Electronics Engineers inc, 2020) Salmanogli, Ahmad; Gokcen, Dincer
This article investigates the difference between two quantum-based theories to calculate the radar cross-section (RCS). Quantum radar cross-section (QRCS) has been commonly analyzed using the dipole approximation method, and the related results show that it can improve the sidelobe of the interference pattern in contrast to the classical methods. This study, on the other hand, utilizes the canonical quantization (or microscopic) method, which is a more comprehensive theory than the dipole approximation method to calculate the radar cross-section. It is shown that there are some similarities between two methods; nonetheless, there are some crucial quantities and factors that have been ignored in the dipole approximation methods. The main difference arises due to the interaction Hamiltonian that two methods relied on. The theoretical calculation shows some critical points suggesting that the dipole approximation method cannot cover all aspects of the radar cross-section calculation. To verify the mentioned point, we establish a new method in which the radar cross-section is calculated by merging the quantum approach with the method of moment (MoM), called quantum-method of moment (QMoM). The simulation results show that the newly established method is in harmony with the canonical quantization method.
Citation - WoS: 43
Citation - Scopus: 53
Application of normal wiggly dual hesitant fuzzy sets to site selection for hydrogen underground storage
(Pergamon-elsevier Science Ltd, 2019) Narayanamoorthy, Samayan; Baleanu, Dumitru; Ramya, L.; Baleanu, Dumitru; Kureethara, Joseph Varghese; Annapoorani, V; 56389; Matematik
The hesitant fuzzy set is a mathematical tool to express multiple values in decision making. If they could not give a resolution, it is important to give priority and importance to a number of different values. Here, we propose normal wiggly dual hesitant fuzzy set (NWDHFS), as an extension of normal wiggly hesitant fuzzy set. We define a new score function of normal wiggly dual hesitant fuzzy information. The NWDHFS can express deep ideas of membership and non-membership information. In this work, we use hesitant fuzzy set to expose the deepest ideas hidden in the thought-level of the decision makers. We show that the NWDHFS can handle the hesitant fuzzy information. It expresses the deeper ideas of hesitant fuzzy set. An illustration is provided to demonstrate the practicality and effectiveness to the application of site selection of the underground storage of hydrogen. We are compelled to look for alternating fuels to suits changing weather conditions and increasing number of vehicles. This alternative fuel is necessary to control global warming and to be economically viable. Based on this, hydrogen gas is selected as a good alternative fuel. The most important statement is the saving of the selected hydrogen gas. Thus, when saving hydrogen fuel, a safe storage space must be selected. Here, we use the MCDM ideas by use of proposed NWDHFV method is to select the appropriate hydrogen underground storage location. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Citation - WoS: 6
Citation - Scopus: 6
Array of nanoparticles coupling with quantum-dot: Lattice plasmon quantum features
(Elsevier Science Bv, 2018) Salmanogli, Ahmad; Gecim, H. Selcuk; 182579
In this study, we analyze the interaction of lattice plasmon with quantum-dot in order to mainly examine the quantum features of the lattice plasmon containing the photonic/plasmonic properties. Despite optical properties of the localized plasmon, the lattice plasmon severely depends on the array geometry, which may influence its quantum features such as uncertainty and the second-order correlation function. To investigate this interaction, we consider a closed system containing an array of the plasmonic nanoparticles and quantum-dot. We analyze this system with full quantum theory by which the array electric far field is quantized and the strength coupling of the quantum-dot array is analytically calculated. Moreover, the system's dynamics are evaluated and studied via the Heisenberg-Langevin equations to attain the system optical modes. We also analytically examine the Purcell factor, which shows the effect of the lattice plasmon on the quantum-dot spontaneous emission. Finally, the lattice plasmon uncertainty and its time evolution of the second-order correlation function at different spatial points are examined. These parameters are dramatically affected by the retarded field effect of the array nanoparticles. We found a severe quantum fluctuation at points where the lattice plasmon occurs, suggesting that the lattice plasmon photons are correlated.
Citation - WoS: 8
Citation - Scopus: 8
Design of quantum sensor to duplicate European Robins navigational system
(Elsevier Science Sa, 2021) Salmanogli, Ahmad; Gokcen, Dincer
In this article, we design a quantum device to duplicate the European Robins procedure to precisely deter-mine the migratory route. In the mentioned procedure, the important issue is the geomagnetic field effect on the magnetic momentum of the created radical pairs (triplet-singlet states) dancing with a special fre-quency. To duplicate the procedure, a quantum sensor consisting of two coincident tripartite systems is designed. Each tripartite system is independently excited with the entangled photons (signal and idler). The interesting point is that by manipulation of the system in the right condition, the microwave cavities modes separately affected by the entangled photons can be entangled. The entangled microwave photons play the same role as the triplet-singlet states present in the bird's navigational system. The key point in the design of the quantum sensor is that the entanglement between microwave photons can be strongly affected by the external magnetic field. In fact, this is the criterion employed by the quantum sensor to sense the magnetic field intensity and the direction. To analyze the system, the canonical quantization (or microscopic) method is used to determine the sensor's Hamiltonian, and also the system dynamics equations of motions are analytically derived using Heisenberg-Langevin equations. (c) 2021 Elsevier B.V. All rights reserved.
Citation - WoS: 1
Citation - Scopus: 2
Dynamical system parameter identification using deep recurrent cell networks: Which gated recurrent unit and when?
(Springer London Ltd, 2021) Akagunduz, Erdem; Cifdaloz, Oguzhan; 279762
In this paper, we investigate the parameter identification problem in dynamical systems through a deep learning approach. Focusing mainly on second-order, linear time-invariant dynamical systems, the topic of damping factor identification is studied. By utilizing a six-layer deep neural network with different recurrent cells, namely GRUs, LSTMs or BiLSTMs; and by feeding input/output sequence pairs captured from a dynamical system simulator, we search for an effective deep recurrent architecture in order to resolve the damping factor identification problem. Our study's results show that, although previously not utilized for this task in the literature, bidirectional gated recurrent cells (BiLSTMs) provide better parameter identification results when compared to unidirectional gated recurrent memory cells such as GRUs and LSTM. Thus, indicating that an input/output sequence pair of finite length, collected from a dynamical system and when observed anachronistically, may carry information in both time directions to predict a dynamical systems parameter.
Citation - WoS: 6
Citation - Scopus: 6
Entangled microwave photons generation using cryogenic low noise amplifier (transistor nonlinearity effects)
(Iop Publishing Ltd, 2022) Salmanogli, Ahmad
This article mainly focuses on important quantum phenomenon called entanglement arising the nonlinearity property. This study uses a unique approach in which transistor nonlinearity effect (third-order nonlinearity) entangled microwave photons are created in a cryogenic low-noise amplifier (LNA). For entanglement analysis, the Hamiltonian of the designed cryogenic LNA (containing two coupled oscillators) is derived, and then, using the dynamic equation of motion, the oscillator's number of photons and the phase-sensitive cross-correlation factor are calculated in the Fourier domain to calculate the entanglement metric. The oscillators are coupled to each other through the gate-drain capacitor, and nonlinear transconductance is as an important factor strongly manipulating the entanglement. As a main conclusion, the study shows that the designed circuit using transistor third-order nonlinearity has the ability to generate the entangled microwave photons at very low intrinsic transconductance and more importantly when the noise figure (NF) is strongly minimized. As a complementary task, the printed circuit board of the cryogenic LNA is designed and simulated to verify the ability of the circuit to achieve an ultralow NF, by which the probability of the generation of entangled microwave photons is increased.
Citation - WoS: 0
Citation - Scopus: 0
Entangled two-photon interference
(Elsevier Gmbh, 2019) Salmanogli, Ahmad; 280089
This article proposes a theoretical solution to one of the original problems of the double-slit experiment, which expresses that it is impossible to identify the photon's path without disturbing it We contend that using the entangled two-photon (signal and idler photons) and inserting a double-slit into the beam of signal (idler) photon, it is possible to distinguish the path of signal (idler) photon, just by the detection of the idler (signal) photon. Basically, the signal and idler photons are highly correlated to each other due to the momentum conservation. Indeed, the photon-photon correlation originates the nonlocal interference effect, so using this effect, lets us know about which path the photon goes through, with its conjugate photon's position detection rather than its detection.
Citation - WoS: 20
Citation - Scopus: 20
Entanglement of Optical and Microcavity Modes by Means of an Optoelectronic System
(Amer Physical Soc, 2019) Salmanogli, Ahmad; Gokcen, Dincer; Gecim, H. Selcuk; 280089
Entanglement between optical and microwave cavity modes is a critical issue in illumination systems. Optomechanical systems are utilized to introduce coupling between the optical and microwave cavity modes. However, due to some restrictions of the optomechanical system, especially sensitivity to the thermal photon noise at room temperature, an alternative optoelectronic system is designed to address the problem. We study a method by which it may be possible to remove the mechanical part of the previous systems to minimize the thermally generated photons. Unlike optomechanical systems, in our system, the optical mode is directly coupled to the microwave cavity mode through the optoelectronic elements without employing any mechanical parts. The utilized approach leads to generating the entangled modes at room temperature. For this purpose, the dynamics of the motion of the optoelectronic system is theoretically derived using the Heisenberg-Langevin equations from which one can calculate the coupling between optical and microwave cavity modes. The direct coupling between the optical and microwave cavity modes is the most important feature and is achieved through the combination of the photodetector and a Varactor diode. Hence, by controlling the photodetector current, that is, the photocurrent, depending on the optical cavity incident wave and the Varactor diode-biased voltage, the coupling between the optical and microwave cavity modes is established. The voltage across the Varactor diode also depends on the generated photocurrent. Consequently, our results show that the coupled modes are entangled at room temperature without the requirement for any mechanical parts.
Citation - WoS: 16
Citation - Scopus: 16
Entanglement Sustainability Improvement Using Optoelectronic Converter in Quantum Radar (Interferometric Object-Sensing)
(Ieee-inst Electrical Electronics Engineers inc, 2021) Salmanogli, Ahmad; Gokcen, Dincer
In this study, the main focus is laid on the design of an optoelectronic converter as a part of the quantum radar to enhance the entanglement between retained and returned modes at high temperatures. The electro-opto-mechanical converter has been widely studied, and the results showed that the operation at high temperature is so crucial to generate and preserve the entanglement between modes. The main problem arises because the mechanical part operating at a low frequency leads to a large number of thermally excited photons, and eventually, the entanglement between modes becomes lost. To solve the problem, we replace the mechanical part with the optoelectronic components. The optical cavity is coupled to the microwave cavity in the newly designed system through a Varactor diode excited by a photodetector. As the main goal, to improve the entanglement sustainability, the effect of the coupling factor of the microwave cavity to photodetector is investigated. The results show that the mentioned factor creates some degrees of freedom to enhance the entanglement at high temperatures compared to the electro-opto-mechanical converter. At some specific values of the coupling factor, the retained and returned fields remained completely entangled up to 5.5 K and partially entangled around 50 K.
Citation - Scopus: 20
Entanglement Sustainability in Quantum Radar
(Institute of Electrical and Electronics Engineers Inc., 2020) Salmanogli, A.; Gokcen, D.; Gecim, H.S.; 182579
In this study, some important parts of a quantum radar are designed using the quantum electrodynamics theory and significantly focused on entanglement conservation. Quantum radar is generally defined as a detection sensor that utilizes the microwave photons like a classical radar and simultaneously employs quantum phenomena to improve detection, identification, and resolution capabilities. However, the entanglement is so fragile, unstable, and difficult to preserve for a long time. Also, more importantly, the entangled states have a tendency to leak away due to the noise. The points mentioned enforces that the entangled states should be carefully studied at each step of the quantum radar detection processes such as the creation of the entangled photons in the tripartite system, the amplification of the photons, the propagation into the atmosphere, and the reflection from the target. At each step, the parameters related to the real mediums and target material can affect the entangled states to leak away easily. The results of simulations indicate that the features of the tripartite system and amplifier are so important to lead the detected photons to remain entangled with the optical modes. Nonetheless, it is found that a lot of entangled photons lose the related non-classical correlation. © 2020 IEEE. Personal use is permitted, but republication/redistribution requires IEEE permission. See https://www.ieee.org/publications/rights/index.html for more information.
Citation - WoS: 1
Citation - Scopus: 3
FEM-based optimal design and testing of synchronous magnetic coupling for aerospace Starter/Generator applications
(Elsevier - Division Reed Elsevier india Pvt Ltd, 2023) Arslan, Sami; İskender, İres; Iskender, Ires; Navruz, Tugba Selcen; 133746; Elektrik-Elektronik Mühendisliği
Improvements in high energy density rare-earth permanent magnets make it innovative to develop magnetic couplings for Starter/Generator applications in the light of more electric aircraft to ensure magnetically insulated contactless power transmission between decoupled shafts for safe operation. Although there are essential studies on magnetic couplings in the literature, especially those for aerospace Starter/Generator structures are rarely encountered. However, methodologies considering system constraints and examining design parameters of couplings are in demand. In response to such a need, this paper proposes the novel design of highly reliable synchronous radial magnetic couplings with torque requirements of 6 and 12 N.m to isolate Starter/Generator and piston engine shafts in model aircraft. The preliminary volume is obtained analytically. Simulations are executed by optimetric approaches in Ansys Maxwell 2D. Optimisation techniques are compared in Maxwell 3D to get the final shape. The retaining sleeve of 0.5 mm is suggested. Loss of synchronisation in the event of the piston shaft failure or exceeding the maximum torque of the coupling is also examined. The torque fluctuation at load changes is 0.1%. Performance tests are conducted on the direct dynamic test bench. Absolute error margin is 37% for the Virtual Work method, 13% for 2D FEM and 6% for 3D FEM. The coupling efficiency is 93.8% at the maximum operating speed and the critical angle, and 96.9% at the minimum torque angle and the minimum operating speed.(c) 2023 Karabuk University. Publishing services by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Citation - WoS: 9
Citation - Scopus: 13
Fiber-Coupling Efficiency of Laser Array Beam From Turbulent Atmosphere to Fiber Link
(Ieee-inst Electrical Electronics Engineers inc, 2023) Gokce, Muhsin Caner; Gökçe, Muhsin Caner; Baykal, Yahya; Ata, Yalcin; 7812; Elektronik ve Haberleşme Mühendisliği
Free-space optical communication (FSOC) systems are nowadays integrated with fiber optical components developed for fiber-optic communications. In such integrated systems, the collected portion of the incident beam on the receiver lens is coupled into a single-mode fiber. The process of coupling, however, is mostly affected by the atmospheric turbulence which distorts the coherency of the propagating beam i.e., it results in speckle over the coupling lens causing a reduction in the coupling efficiency. In this article, we aimed at investigating the fiber coupling efficiency of laser array beams propagating in a turbulent atmosphere. For this purpose, using the Huygens-Fresnel principle, mutual coherence function (MCF) for a laser array beam incidence is formulated. In this way, the average power coupled into the fiber and the average received power on the coupling lens are derived for a laser array beam incidence. It is found that the fiber coupling efficiency clearly increases with the increase in ring radius and the number of Gaussian beams in the array and rapidly decreases with increasing structure constant of atmosphere, link distance, and the number of speckles over the receiver aperture. We also demonstrate the effect of various FSOC system parameters on the coupling efficiency.
Citation - WoS: 12
Citation - Scopus: 12
Intensity fluctuations of laser array beams in non-kolmogorov turbulence
(Ieee-inst Electrical Electronics Engineers inc, 2015) Gercekcioglu, Hamza; Baykal, Yahya; 7812
On-axis intensity fluctuations of laser array beams are evaluated when they are used in a weakly turbulent non-Kolmogorov atmosphere. Our formulation of the scintillation index is based on the Rytov method, which in the limiting case, correctly reduces to the known Gaussian beam scintillation index in weak Kolmogorov turbulence. When the radius of the ring (on which the array beamlets are placed), number of beamlets forming the laser array, source size of the beamlets, propagation distance or the wavelength is fixed, a decrease in the power law exponent of the non-Kolmogorov spectrum is found to decrease the scintillation index. Examining for any realization of the non-Kolmogorov spectrum, it is observed that an increase in the ring radius, number of beamlets, wavelength, and decrease in the source size of the beamlet, propagation distance reduces the intensity fluctuations.
Citation - WoS: 8
Citation - Scopus: 9
Joint parameter and state estimation of the hemodynamic model by iterative extended Kalman smoother
(Elsevier Sci Ltd, 2016) Aslan, Serdar; Töreyin, Behçet Uğur; Cemgil, Ali Taylan; Aslan, Murat Samil; Toreyin, Behcet Ugur; Akin, Ata; 19325; Elektrik-Elektronik Mühendisliği
The joint estimation of the parameters and the states of the hemodynamic model from the blood oxygen level dependent (BOLD) signal is a challenging problem. In the functional magnetic resonance imaging (fMRI) literature, quite interestingly, many proposed algorithms work only as a filtering method. This makes the estimation of hidden states and parameters less reliable compared with the algorithms that use smoothing. In standard implementations, smoothing is performed only once. However, joint state and parameter estimation can be improved substantially by iterating smoothing schemes such as the extended Kalman smoother (IEKS). In the fMRI literature, extended Kalman filtering is thought to be less accurate than standard particle filtering (PF). We compared EKF with PF and observed that the contrary is true. We improved the EKF performance by adding smoother. By iterative scheme joint hemodynamic and parameter estimation is improved substantially. We compared IEKS performance with the square-root cubature Kalman smoother (SCKS) algorithm. We show that its accuracy for the state and the parameter estimation is better and much faster than iterative SCKS. SCKS was found to be a better estimator than the dynamic expectation maximization (DEM), EKF, local linearization filter (LLF) and PP methods. We show in this paper that IEKS is a better estimator than iterative SCKS under different process and measurement noise conditions. As a result, IEKS seems to be the best method we evaluated in all aspects. (C) 2015 Elsevier Ltd. All rights reserved.
Citation - WoS: 20
Citation - Scopus: 21
Multimode laser beam scintillations in non-kolmogorov turbulence
(Ieee-inst Electrical Electronics Engineers inc, 2015) Baykal, Yahya; 7812
Employing the Rytov solution, the scintillation index at the origin of the receiver plane is evaluated in non-Kolmogorov weak atmospheric turbulence when multimode laser incidence is used. The solution presented can be used when the multimode is composed of even modes. The novelty of this work lies in the theoretical combination of multimode laser beam excitation and non-Kolmogorov turbulence in the scintillation evaluations, which is not known both theoretically and experimentally. The study involves mathematical rigor but no experimental results. Being valid for any power law exponent of the non-Kolmogorov turbulence, the scintillations of the multimode beams are found to be smaller than the scintillation index of a single Gaussian beam. For the multimode laser beam excitation, the scintillation index is smaller at smaller power law exponent values. If the multimode content is formed by beams with larger mode numbers, the scintillations decrease for any non-Kolmogorov realization. When large sized beams are used in the multimode, the scintillations increase as compared to small sized content, and the scintillations become almost the same as the Gaussian beam scintillations. Comparing the multimode structures that have the same number of beams, the ones with higher order modes yield smaller scintillations, and for such multimode structures, very similar scintillation index behaviour versus the power law exponent can be obtained by varying the amplitudes of the modes composing the multimode. The main contribution of this paper is the formulation and evaluation of the scintillation noise in order to understand whether the use of multimode laser excitation will improve the link performance of optical wireless communication systems operating in a non-Kolmogorov atmosphere.
Citation - WoS: 5
Citation - Scopus: 6
Optical and Microcavity Modes Entanglement by Means of Plasmonic Opto-Mechanical System
(Ieee-inst Electrical Electronics Engineers inc, 2020) Salmanogli, Ahmad; Gecim, H. Selcuk; 182579
In this study, plasmonic opto-mechanical tripartite system is proposed to improve the performance of the traditional tripartite opto-mechanical system. In the new design, significantly, optical cavity and microwave cavity modes are directly coupled to each other. The originality of this work consists in embedding a microsphere in the optical cavity where the plasmon-plasmon interaction between the metal plates generates a plasmon mode inside the optical cavity and changes the electric field distribution. The plasmonic property influences the microsphere electrical properties and interacts with the photonic mode inside the optical cavity by which the microwave cavity properties are also affected through coupling to the optical cavity. Microsphere introduces a capacitor as a function of plasmonic properties that can strongly influence the microwave cavity resonance frequency. That is the feature that we want to utilize to enhance the performance of the system at high temperature. The results show that the optical cavity and microwave cavity modes remain entangled at high temperature. It is contributed to the plasmonic-based capacitor induced by the microsphere which is not affected by the thermally induced photons (noise). It is worth mentioning that the induced noise strongly restricts the traditional tripartite system operated with a wide bandwidth.
Citation - WoS: 5
Citation - Scopus: 5
Plasmonic Effect on Quantum-Dot Photodetector Responsivity
(Ieee-inst Electrical Electronics Engineers inc, 2019) Salmanogli, Ahmad; Gokcen, Dincer; Gecim, H. Selcuk; 280089; 182579
In this paper, we analyze and simulate the plasmonic effect on the quantum-dot photodetector responsivity. For this purpose, a plasmonic-based quantum-dot photodetector is designed in which a few quantum dots are embedded in the hot-spot regions of the plasmonic nanoparticles, wherein a high-intensity localized field is created. Notably, due to the maximum overlapping of the plasmonic field with the quantum dots at the hot spot, some of the optical characteristics of the quantum dot, particularly the spontaneous emission decay rate, are changed. This paper focuses on the engineering of the decay rate, through which we found that the quantum-dot photodetector responsivity is strongly enhanced with the order of 100 times at the visible range. For analyzing the proposed system, we first work on the plasmonic effect of the nanoparticle on the quantum-dot lifetime using the Heisenberg-Langevin equations. It is shown that by embedding the quantum dots at the hot spot of the nanoparticle, the decay rate of the quantum dot is dramatically influenced. In the following, plasmonic-quantum dot system responsivity is theoretically examined using a time-varying perturbation theory. Using this approach is necessary because the spontaneous emission cannot be analyzed with the classical methods. Consequently, it is proved that using plasmonic effect leads to enhanced photodetector responsivity, suggesting that even very small incoming signals are detectable.
Citation - WoS: 7
Citation - Scopus: 7
Plasmonic System as a Compound Eye: Image Point-Spread Function Enhancing by Entanglement
(Ieee-inst Electrical Electronics Engineers inc, 2018) Salmanogli, Ahmad; Gecim, H. Selcuk; Piskin, Erhan; 280089
In this paper, we introduce a plasmonic system that can operate as a compound eye. Based on the advantages mentioned in some previous works for the compound eye, we designed a plasmonic system that contains faraway plasmonic nanoparticles (NPs) that act independently like an ommatidium in the compound eye. This plasmonic system performance is analyzed with full quantum theory by which it is theoretically proved that with the interaction of light with NPs, the scattering light, and generated phonon can be entangled due to the NPs Ohmic loss. Consequently, the quantum states of the system before, after, and during the absorption and scattering of the incident photon, were quantum mechanically subjected. By the introduced theoretical formula and modeling results, it is shown that the plasmonic system can operate similar to the compound eye, if the critical parameters, such as system's focus point, NPs scattering angle, and inter-distance between NPs are suitably designed. More importantly, due to the entanglement between the scattering light and the generated phonon, it is theoretically proved that the point-spread function is improved when the traditional lens in the compound eye is replaced by the plasmonic NPs leading to an enhanced image resolution. Finally, a simple conceptual design of the plasmonic system is presented and then a few contributed modeling results are introduced.
Citation - WoS: 38
Citation - Scopus: 44
Propagation of modified Bessel-Gaussian beams in turbulence
(Elsevier Sci Ltd, 2008) Eyyuboglu, Halil Tanyer; Hardalac, Firat; 7688
We investigate the propagation characteristics of modified Bessel-Gaussian beams traveling in a turbulent atmosphere. The source beam formulation comprises a Gaussian exponential and the summation of modified Bessel functions. Based on an extended Huygens-Fresnel principle, the receiver plane intensity is formulated and solved down to a double integral stage. Source beam illustrations show that modified Bessel-Gaussian beams, except the lowest order case, will have well-like shapes. Modified Bessel-Gaussian beams with summations will experience lobe slicing and will display more or less the same profile regardless of order content. After propagating in turbulent atmosphere, it is observed that a modified Bessel-Gaussian beam will transform into a Bessel-Gaussian beam. Furthermore it is seen that modified Bessel-Gaussian beams with different Bessel function combinations, but possessing nearly the same profile, will differentiate during propagation. Increasing turbulence strength is found to accelerate the beam transformation toward the eventual Gaussian shape. (c) 2007 Elsevier Ltd. All rights reserved.
Citation - WoS: 3
Citation - Scopus: 2
Quantum correlation of microwave two-mode squeezed state generated by nonlinearity of InP HEMT
(Nature Portfolio, 2023) Salmanogli, A.
This study significantly concentrates on cryogenic InP HEMT high-frequency circuit analysis using quantum theory to find how the transistor nonlinearity can affect the quantum correlation of the modes generated. Firstly, the total Hamiltonian of the circuit is derived, and the dynamic equation of the motion contributed is examined using the Heisenberg-Langevin equation. Using the nonlinear Hamiltonian, some components are attached to the intrinsic internal circuit of InP HEMT to address the circuit characteristics fully. The components attached are arisen due to the nonlinearity effects. As a result, the theoretical calculations show that the states generated in the circuit are mixed, and no pure state is produced. Accordingly, the modified circuit generates the two-mode squeezed thermal state, which means one can focus on calculating the Gaussian quantum discord to evaluate quantum correlation. It is also found that the nonlinearity factors (addressed as the nonlinear components in the circuit) can intensely influence the squeezed thermal state by which the quantum discord is changed. Finally, as the primary point, it is concluded that although it is possible to enhance the quantum correlation between modes by engineering the nonlinear components; however, attaining quantum discord greater than unity, entangled microwave photons, seems a challenging task since InP HEMT operates at 4.2 K.

Browse

Browsing Elektrik Elektronik Mühendisliği Bölümü by Scopus Q "Q1"