İnşaat Mühendisliği Bölümü Yayın Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/395
Browse
2 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 8The Performance of Water Jet Pumps and Their Application in Slurry Transportation(Turkish Soc thermal Sciences Technology, 2023) Kokpinar, Mehmet Ali; Gogus, MustafaThis present work is focused firstly on an experimental investigation for the optimum design of water jet pumps to be used in the hydrotransport of solid particles through pipeline systems. Experiments were conducted in a closed test loop using five types of jet pumps with various dimensions of the driving nozzle, suction nozzle, mixing chamber, and diffuser employing water as driving and suction fluid. The efficiency of each water jet pump element was analyzed and interpretations of results related to each water jet pump were made about the parts to be considered in the optimum design of a water jet pump. From the experimental results, the water jet pump having the optimum mixing chamber, suction nozzle, driving nozzle location, and cross-sectional dimensions produced a maximum efficiency of about 33%. In the second part of the study, the solid particle carrying capacity of water jet pumps in a pipeline system was studied under saltation, moving bed, and heterogeneous flow regimes by introducing seven different types of solid particles having various concentrations into the closed test loop. The effect of jet pumps on separating solid particles from flow in a region was investigated. A curved form of a by-pass system called the 'flow division unit' was added to the main pipeline system and through the flow division unit, then most of the solid particles in the flow were forced to flow towards the suction pipe of the jet pump. As a result of this, only water with very small particle concentrations passed through the centrifugal pumps, and in this way, the wear risk of the centrifugal pump was reduced considerably.Article Effect of Downstream Expansion of a Long-Throated Flume on Flow Properties(Gazi Univ, 2021) Hatipoglu, Murat; Gogus, Mustafa; Ucar, MuhammedLong throated flumes are widely used flow measurement devices that not requiring site-specific level to flow curves and therefore laboratory experiments. In this study, downstream expansion effect of the long throated flumes with rectangular cross section were analysed for the dimensionless parameters derived from Buckingham's pi theorem and some other known hydraulic quantities such as discharge coefficient, approach velocity coefficient, submergence ratio of the flow etc. Therefore, five downstream transitions with different expansion angles were tested. In each test, the critical depth y(c), the flow head at the depth measurement section h(1), minimum required energy dissipater length L-t and the head after hydraulic jump y(2) were measured for both modular and free flow conditions. The relation of hydraulic quantities of calculated dimensionless parameters with relevant parameters; modular limits, approach velocity coefficients and discharge coefficients etc. were graphed to represent the design relationships for long throated flumes.