Arslan, KamilOnur, Nevzat2017-06-092017-06-092014Arslan, K., Onur, N. (2014). Experimental investigation of flow and heat transfer in rectangular cross-sectioned duct with baffles mounted on the bottom surface with different inclination angles. Heat And Mass Transfer, 50(2), 169-181. http://dx.doi.org/10.1007/s00231-013-1236-60947-7411http://hdl.handle.net/20.500.12416/1618In this study, steady-state forced convection heat transfer and pressure drop characteristics in a horizontal rectangular cross-sectioned duct, baffles mounted on the bottom surface with different inclination angles were investigated experimentally in the Reynolds number range from 1 x 10(3) to 1 x 10(4). The study was performed under turbulent flow conditions. Effects of different baffle inclination angles on flow and heat transfer were studied. Results are also presented in terms of thermal enhancement factor. It is observed that increasing in baffle inclination angle enhances the heat transfer and causes an increase in pressure drop in the duct.eninfo:eu-repo/semantics/closedAccessTurbulent-Flow3-Dimensional Blocks2-Dimensional RibsForced-ConvectionChannelExperimental investigation of flow and heat transfer in rectangular cross-sectioned duct with baffles mounted on the bottom surface with different inclination anglesExperimental Investigation of Flow and Heat Transfer in Rectangular Cross-Sectioned Duct With Baffles Mounted on the Bottom Surface With Different Inclination AnglesArticle50216918110.1007/s00231-013-1236-6