İnşaat Mühendisliği Bölümü

Permanent URI for this communityhttps://hdl.handle.net/20.500.12416/17

Browse

Now showing 1 - 18 of 18

Citation - WoS: 3
Citation - Scopus: 4
An analytical investigation of rigid plastic beams underimpact loading
(Gazi Univ, Fac Engineering Architecture, 2015) Gultop, Tekin; Gültop, Tekin; Yilmaz, Mahmut Cem; Alyavuz, Bahadir; 5168; İnşaat Mühendisliği
Beams might be subjected to impact loading which is a particular type of dynamic loading during their service lives. In this study the behaviour of beams under low speed impact loading has been investigated analytically. Simply supported and fixed ended beams have been analyzed with the assumption of rigid plastic behaviour. The collapse mechanism has been assumed to emerge by the instant formation of plastic hinges, hence, a limit analysis has been performed under dynamic loading considering the conservation principles of energy and momentum. The behaviour of rigid plastic beams under impact loading has been compared to the behaviour of elastic beams under similar loading conditions.
Citation - WoS: 5
Citation - Scopus: 5
An experimental investigation of flow resistance and turbulent flow in brush fish pass
(Ice Publishing, 2019) Kucukali, Serhat; Küçükali, Serhat; 20413; İnşaat Mühendisliği
The present study aimed to search for chicken abdominal fat deposition-related polymorphisms within RB1 and to provide functional evidence for significantly associated genetic variants. Association analyses showed that 11 single nucleotide polymorphisms (SNPs) in intron 17 of RB1, were significantly associated with both abdominal fat weight (P < 0.05) and abdominal fat percentage (P < 0.05). Functional analysis revealed that the A allele of g.32828A>G repressed the transcriptional efficiency of RB1 in vitro, through binding nuclear factor-kappa B (NF-B-K) and SRY-related HMG box protein 2 (SOX2). Furthermore, RB1 mRNA expression levels in the abdominal fat tissue of individuals with the A/A genotype of g.32828A>G were lower than those of individuals with the G/G genotype. Collectively, we propose that the intronic SNP g.32828A>G of RB1 is an obesity-associated variant that directly affects binding with NF-B-K and SOX2, leading to changes in RB1 expression which in turn may influence chicken abdominal fat deposition.
Citation - WoS: 6
Citation - Scopus: 8
Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling
(Univ Tehran, Danishgah-i Tihran, 2021) Yildiz, Ali; Marti, Ali Ihsan; Gogus, Mustafa; 6062
The spillways of hydraulic structures transfer excessive water from dam reservoir to the downstream in a safe and controlled manner. A labyrinth or triangular weir is a flat spillway folded in plain view. The labyrinth weirs provide an increase in crest length for a given channel width and increase the flow capacity for a given weir load. As a result of the increased flow capacity, the labyrinth and triangular weirs require less space in the dam body than the flat weirs. In this study, experiments were carried out on the labyrinth weirs containing triangles of different heights and numbers by using 3 different weir heights (P=20cm, 30cm, and 40 cm) and 4 different weir shapes. Each experiment was repeated for 30 different discharge values. The effects of weir height and weir shape on the total head over the weir (H-T) and discharge (Q) were investigated. In addition, the numerical models of all experimental setups were created by ANSYS-Fluent program using Computational Fluid Dynamics (CFD). By comparing the results obtained from the numerical models with the physical models, the accuracy of the numerical models was tested. According to the results, as the number of the triangles (N) of the weir increases, the discharge coefficient (Ca) decreases. The weir height (P) does not have a major effect on the discharge.
Citation - WoS: 1
Citation - Scopus: 1
Dynamics of a beam-column element on an elastic foundation
(Canadian Science Publishing, Nrc Research Press, 2016) Dinckal, Cigdem; Dinçkal, Çiğdem; Alemdar, Bulent N.; Gulkan, Polat H.; 26773; 5743; İnşaat Mühendisliği
An exact analytical solution of a harmonically vibrating beam-column element resting on an elastic Winkler foundation is derived. The solution covers four cases comprised of constant compressive or tensile axial force with the restrictions k(s) - m omega(2) < 0 and k(s) - m omega(2) > 0. The proposed solution is not restricted to a particular range of magnitudes of the foundation parameter. Closed form solutions of dynamic shape functions are explicitly derived for each sub-case to obtain frequency-dependent dynamic stiffness terms that constitute the exact dynamic stiffness matrices. Four numerical examples are provided to demonstrate the merits of the present study.
Citation - WoS: 0
Citation - Scopus: 0
Effect of Downstream Expansion of a Long-Throated Flume on Flow Properties
(Gazi Univ, 2021) Hatipoglu, Murat; Gogus, Mustafa; Ucar, Muhammed; 6062
Long throated flumes are widely used flow measurement devices that not requiring site-specific level to flow curves and therefore laboratory experiments. In this study, downstream expansion effect of the long throated flumes with rectangular cross section were analysed for the dimensionless parameters derived from Buckingham's pi theorem and some other known hydraulic quantities such as discharge coefficient, approach velocity coefficient, submergence ratio of the flow etc. Therefore, five downstream transitions with different expansion angles were tested. In each test, the critical depth y(c), the flow head at the depth measurement section h(1), minimum required energy dissipater length L-t and the head after hydraulic jump y(2) were measured for both modular and free flow conditions. The relation of hydraulic quantities of calculated dimensionless parameters with relevant parameters; modular limits, approach velocity coefficients and discharge coefficients etc. were graphed to represent the design relationships for long throated flumes.
Citation - WoS: 2
Citation - Scopus: 2
Effect of particle size on flip bucket scour
(Canadian Science Publishing, Nrc Research Press, 2016) Kokpinar, Mehmet Ali; Küçükali, Serhat; Kucukali, Serhat; 20413; İnşaat Mühendisliği
This study quantifies the dimensionless maximum scour depth d(s)/D-50 downstream of flip buckets as a function of the square of the densimetric Froude number Fr-d(2), jet Reynolds number Re, lip angle, and sediment non-uniformity constant. The proposed formula is valid for Fr-d = 2.9-29.69, Re = 8.9 x 10(3)-4.2 x 10(5), and We > 32. Moreover, the scour profiles for different sediment sizes (D-50 = 3-17 mm) are presented from the Kigi Dam physical model and the effect of the Reynolds number on scour process is discussed. The prediction capacity of the proposed formula is compared with the existing empirical formulas in the literature and it is shown that the proposed dimensionally homogenous formula made better estimations. The procedure described here has a sound physical basis and it can be used to estimate the maximum scour depth downstream of flip buckets.
Citation - WoS: 1
Citation - Scopus: 1
Effect of sediment properties on incipient motion of large solitary particles on fixed bed
(Emerald Group Publishing Ltd, 2021) Gogus, Mustafa; Haspolat, Emre; 6062
The effect of sediment properties such as shape, size, specific weight and packing (support) condition on the incipient motion of large solitary particles was systematically investigated. A series of experiments was conducted in a rectangular tilting flume with a smooth fixed (rigid) bed under uniform flow conditions. In each experiment, a thin fibreglass rectangular rod of height 1/5 or 1.5/5 of the height of the particle was placed just downstream of the particle to imitate the interaction of particles in rivers. Contrary to common belief and knowledge, it was found that the Shields parameter decreased as the dimensionless grain diameter increased for a given bed slope under rough turbulent flow conditions. Moreover, a larger shear stress was needed to start the motion of particles on steeper slopes for a given particle diameter. An increase in the ratio of the support height to particle height by 50% resulted in an increase in the dimensionless critical shear stress by almost six times for the same particle and relative roughness.
Citation - WoS: 1
Citation - Scopus: 3
Effects of collars on local scour around semi-circular end bridge abutments
(Emerald Group Publishing Ltd, 2023) Gogus, Mustafa; Daskin, Sueyla; Gokmener, Serkan
The occurrence of scour around bridge elements due to the transportation of bed material during flood events can cause serious structural damage and loss of life. Increased uncertainties in precipitation and runoff predictions due to climate change make this phenomenon more complex and dangerous. Bridge scour countermeasures should thus be more focused on decreasing scour formation around bridge elements. In this study, abutment scour under clear-water conditions with constant flow intensity was conducted and collars were tested as scour countermeasures around semi-circular end bridge abutments. The experimental study was performed in a rectangular channel with an almost uniform cohesionless bed material for 3 h with and without collars. Collars of various lengths located at different elevations around the abutments were tested to investigate the effect of collars on scour development. The results of the study showed that the scour depth decreased with increasing collar width and when the collar was placed below the bed level for a given abutment length. The results were compared with those of similar earlier studies to show the effect of abutment shape, size of the bed sediment and test durations on the development of scour depth around abutments.
Citation - WoS: 16
Citation - Scopus: 25
Flow and Turbulence Structure in A Baffle-Brush Fish Pass
(Ice Publishing, 2018) Kucukali, Serhat; Küçükali, Serhat; Hassinger, Reinhard; 20413; İnşaat Mühendisliği
The flow an d turbulence characteristics of a new baffle-brush type fish pass were investigated experimentally in a 2 m wide rectangular flume with a bed slope of 4% and Reynolds and Froude numbers in the range 5 x 10(4)-2.8 x 10(5) and 0.17-0.23, respectively. The baffle-brush fishway combines the properties of a baffle (Larinier) fish pass with the features of the brush-furnished fishway. The baffle-brush fish pass ensures continuous low-and high-velocity migration corridors for both strong (e.g. salmon) and weak swimming (e.g. river lamprey) fish, with negligible flow accelerations (i.e. quasi-uniform conditions). The turbulent kinetic energy (TKE) takes its maximum value near the centre of the baffle zone and decays towards the brush zone. The effects of the Reynolds number (Re) on the resultant velocity and TKE distributions were also investigated. For Re = 2 x 10(5), the TKE was in the range 0.05-0.21 m(2)/s(2) with an average value of 0.11 m(2)/s(2) in the baffle section, whereas it ranged between 0.007 and 0.04 m(2)/s(2) with an average value of 0.02 m(2)/s(2) in the brush section. In the proposed fish pass there is no need to build resting pools.
Citation - WoS: 0
Citation - Scopus: 0
Frame finite element model for nonlinear and vibration analysis of steel structures with Beam-Column and Column-Base Semi-Rigid Connections
(Gazi Univ, Fac Engineering Architecture, 2022) Ozel, Halil Firat; Özel, Halil Fırat; Saritas, Afsin; 237150; İnşaat Mühendisliği
In this paper, a shear deformable force-based frame finite element with semi-rigid connections is derived for nonlinear analysis of steel structures. Distributed plasticity approach is defined along element length and section depth, and linear or non-linear semi-rigid connection behavior can be specified anywhere along elements without the necessity to define additional nodes and to increase the degrees of freedom of the structural system. To perform vibration analyses with similar accuracy, force-based consistent mass matrix is used considering semi-rigidity in connections and an appropriate shear correction coefficient for I-sections. The element formulation is presented in 2 dimensions to simplify the formulation, and numerical validation and comparison studies are carried out on complex and irregular structures in 2-D and 3-D. In models with semi-rigid connections, the effect of nonlinear behavior on the structural system has been studied in both beam-column and column-bases. In the presented examples, it was possible to push structures higher than the existing displacements, and it was revealed that the nonlinear behavior in the column-base connections could create much more critical results for the structural systems with P-Delta effects. In addition, high-level accuracy results were obtained when performing vibration analyses with the application of force-based consistent mass matrix.
Citation - WoS: 15
Citation - Scopus: 14
Free Vibration Analysis of Carbon Nanotubes by Using Finite Element Method
(Springer, 2016) Dinckal, C.; Dinçkal, Çiğdem; 26773; İnşaat Mühendisliği
In the present study, an efficient and accurate finite element model for vibration analysis of carbon nanotubes (CNTs) with both Euler-Bernoulli and Timoshenko beam theory has been presented. For this purpose, an analytical solution for the exact dynamic shape functions of CNTs based on both Euler-Bernoulli and Timoshenko beam theories has been derived. The solution is general and is not restricted to a particular range of magnitudes of the nonlocal parameters. The exact dynamic shape functions have been utilized to derive analytic expressions for the coefficients of the exact dynamic (frequency-dependent) element stiffness matrix. Numerical results are presented to figure out the effects of nonlocal parameter, mode number and slenderness ratio on the vibration characteristics of CNTs. It is shown that these results are in good agreement with those reported in the literature. Present element formulation will be useful for structural analyses of nanostructures with complex geometries, loadings, material properties and boundary conditions.
Citation - WoS: 11
Citation - Scopus: 14
Hydraulic Model Test Results Of Baffle-Brush Fish Pass
(Ice Publishing, 2015) Kucukali, Serhat; Küçükali, Serhat; Hassinger, Reinhard; 20413; İnşaat Mühendisliği
The flow characteristics (depth, velocity, energy dissipation) of a new baffle-brush fish pass were investigated experimentally in a 2 m wide rectangular flume which has a bed slope of 4% for discharges of 100-550 l/s. In all the experiments, quasi-uniform and sub-critical flow conditions and Froude numbers between 0.17 and 0.23 were observed. The Darcy-Weisbach friction factor was negatively correlated with the relative submergence of the brush elements. Two different characteristic velocity regions were identified, namely the baffle region and the brush region. The turbulence intensities were in the range 38-79% in the baffle zone and 13-31% in the brush zone. The hydraulic test results showed that this type of fish pass can produce adequate flow depth and favourable local flow velocities for the design discharge of 0.2 m(2)/s (relative submergence of brushes = 1.03), which is suitable for different fish species.
Citation - WoS: 2
Citation - Scopus: 2
Local scour evolution around semi-circular end bridge abutment in quasi-unsteady condition
(Ice Publishing, 2022) Gokmener, Serkan; Gogus, Mustafa; 6062
In this experimental study, the temporal development of local scour is studied around semi-circular end bridge abutments under quasi-unsteady clear-water flow conditions in a rectangular sediment channel. A step-wise hydrograph of 6 h duration is used in the experiments. Six different abutment lengths having constant width, with uniform sand as bed material, were tested for three different successive flows - each applied continuously for 2 h. Bathymetry of the bed level was measured around the abutment every 15 min with the help of a measurement device to observe temporal development of the local scour around the semi-circular end abutment. Effects of the abutment length, flow intensity and time on the scour depths around semi-circular end bridge abutments, along with those at the front, upstream and downstream faces of the abutment, are also investigated and discussed. It is shown that the maximum scour depth always occurs at the front noses of the abutments compared with those at the upstream and downstream noses. A dimensionless empirical formula is derived to predict the scour depth at the front nose of the abutment as a function of related parameters. The results reveal that flow intensity is the most critical parameter in scour development.
Citation - WoS: 3
Citation - Scopus: 4
Mechanical Characteristics of Environmentally Friendly Permeable Pavement: Enhanced Porous Asphalt
(Jordan Univ Science & Technology, 2024) Ibis, Ahmet Bugra; Sengoz, Burak; Almusawi, Ali; Ozdemir, Derya Kaya; Topal, Ali
This study explores the mechanical properties of porous -asphalt pavement, focusing on the influence of various polymers (elastomeric and reactive elastomeric terpolymers) and different aggregate compositions. Two aggregates were utilized: one is exclusively limestone -based and the other is a blend of limestone and basalt aggregates. The research findings unveiled that mixtures containing the conventional bitumen failed to meet the Cantabro loss -test criterion required for porous asphalt, necessitating a maximum threshold of 20%. In contrast, asphalt mixtures modified with polymers exhibited notably superior performance, particularly in terms of permeability, Cantabro loss and the ratio of indirect tensile strength. These results underscore the significant impact of polymer modification on enhancing the crucial mechanical properties of porous asphalt. Therefore, the study suggests the adoption of polymer -modified asphalt as a viable strategy to improve pavement longevity and overall performance, promoting its use for sustainable and durable infrastructure.
Citation - WoS: 1
Citation - Scopus: 1
Occurrence of a swirling vortex without an intake
(Gazi Univ, 2021) Tastan, Kerem; Yıldırım, Nevzat; Yildirim, Nevzat; 12654; İnşaat Mühendisliği
In this study, mechanisms that cause the occurrence of a swirling vortex without an intake are explained. There are more than one different reasons which may cause the occurrence of an air-core vortex or a swirling-vortex flow filament within an ambient fluid. An air-core vortex or a swirling vortex flow filament can also occur in an ambient fluid media without an intake provided that the coaxial subsurface depressions and thereby the imaginary subsurface spherical sink surface sectors are hydraulically developed by any means (such as rotation of the fluid mass of spherical sector-form, impinging or penetrating jet flow, continuously entering solid body or string etc.). Although studies related to occurrence of a swirling vortex in case of an intake can be found in available literature, there are currently no studies which explains the occurrence mechanisms of a swirling vortex without an intake in detail. In this study, it is showed that the causes for the occurrence of the air-core vortex or the swirling vortex filament can be different but the main mechanism of development of the air-core vortex or the swirling vortex filament is identical for all cases.
Citation - Scopus: 2
On the properties of anisotropic engineering materials based upon orthonormal representations
(2012) Dirxçkal, C.; Dinçkal, Çiğdem; 26773; İnşaat Mühendisliği
A decomposition method[5] based upon orthonormal representations is reviewed and improved toexpress any anisotropic engineering tensor showing the effect of the material properties on the structures. A new decomposed form for the stress tensor (example for symmetric second rank tensor) different from the one available in the literature where the engineering understanding is improved, is presented. Numerical examples from different engineering materials serve to illustrate and verify the decomposition procedure. The norm concept of elastic constant tensor and norm ratios are used to study the anisotropy of these materials. It is shown that this method allows to investigate the elastic and mechanical properties of an anisotropic material possessing any material symmetry and determine anisotropy degree of that material. For a material given from an unknown symmetry, it is possible to determine its material symmetry type by this method.
Citation - WoS: 47
Citation - Scopus: 59
Physical and Chemical Actions of Nano-Mineral Additives on Properties of High-Volume Fly Ash Engineered Cementitious Composites
(Amer Concrete inst, 2016) Al-Najjar, Y.; Yesilmen, S.; Al-Dahawi, Majeed; Sahmaran, M.; Yildirim, G.; Lachemi, M.; Amleh, L.; 17729
Unlike conventional concrete, the material design process for engineered cementitious composites (ECC) involves micromechanics-based design theory, paving the way for the use of high volumes of fly ash (HVFA) as a major component. Using high volumes of fly ash (up to 85% weight fraction of cement) in ECC mixtures enables improved tensile ductility (approximately a 3% increase in long-term tensile strain) with reduced crack widths, although it also leads to significantly reduced early-age compressive and tensile strength and chloride ion resistance. However, nanomineral additives are known to improve mechanical strength and durability of HVFA systems. The study emphasizes the effects of different fly ash (FA)/cement ratios on various properties (hydration and microstructural characteristics, transport and mechanical properties) of ECC mixtures designed with different mineral additives. Experimental results confirm that although different optimum levels can be selected to favor various ECC properties, optimum weight fraction of FA is dependent on the mechanism of nanomodification (that is, type of modifier). The optimum level of fly ash weight fraction that yields the highest rate of improvement through nanomodification of ECC varies for different mechanical and transport properties.
Citation - Scopus: 2
Strength prediction of engineered cementitious composites with artificial neural networks
(MIM RESEARCH GROUP, 2021) Yesilmen, S.
Engineered Cementitious composites (ECC) became widely popular in the last decade due to their superior mechanical and durability properties. Strength prediction of ECC remains an important subject since the variation of strength with age is more emphasized in these composites. In this study, mix design components and corresponding strengths of various ECC designs are obtained from the literature and ANN models were developed to predict compressive and flexural strength of ECCs. Error margins of both models were on the lower side of the reported error values in the available literature while using data with the highest variability and noise. As a result, both models claim considerable applicability in all ECC mixture types. © 2021 MIM Research Group. All rights reserved.

Browse

Browsing İnşaat Mühendisliği Bölümü by Scopus Q "Q3"