Scopus İndeksli Yayınlar Koleksiyonu

Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/8651

Browse

Search Results

Now showing 1 - 9 of 9
  • Article
    Citation - WoS: 7
    Citation - Scopus: 7
    Entangled Microwave Photons Generation Using Cryogenic Low Noise Amplifier (Transistor Nonlinearity Effects)
    (Iop Publishing Ltd, 2022) Salmanogli, Ahmad
    This article mainly focuses on important quantum phenomenon called entanglement arising the nonlinearity property. This study uses a unique approach in which transistor nonlinearity effect (third-order nonlinearity) entangled microwave photons are created in a cryogenic low-noise amplifier (LNA). For entanglement analysis, the Hamiltonian of the designed cryogenic LNA (containing two coupled oscillators) is derived, and then, using the dynamic equation of motion, the oscillator's number of photons and the phase-sensitive cross-correlation factor are calculated in the Fourier domain to calculate the entanglement metric. The oscillators are coupled to each other through the gate-drain capacitor, and nonlinear transconductance is as an important factor strongly manipulating the entanglement. As a main conclusion, the study shows that the designed circuit using transistor third-order nonlinearity has the ability to generate the entangled microwave photons at very low intrinsic transconductance and more importantly when the noise figure (NF) is strongly minimized. As a complementary task, the printed circuit board of the cryogenic LNA is designed and simulated to verify the ability of the circuit to achieve an ultralow NF, by which the probability of the generation of entangled microwave photons is increased.
  • Article
    Quantum Dot Transition Rate Modifying by Coupling To Lattice Plasmon
    (Springer, 2023) Salmanogli, Ahmad; Gecim, H. Selcuk; Hatem, Sude
    In this study, a plasmonic system coupled to a quantum dot is defined to generate the entanglement between two non-simultaneous emitted output modes. The quantum dot with three energy levels creates two different transition rates by which non-simultaneous photons are emitted. Thus, it seems that the entanglement between two emitted modes is forbidden. However, the simulation results show the entanglement between the output modes. It is because the original transition rates of the quantum dot are modified due to the lattice plasmon coupling effect. It means that the effective transition rate affected by the lattice plasmon plays a key role. The lattice plasmon coupling to quantum dot at some locations leads to a simultaneous transition by which the entanglement between output modes is established. The entangled output modes refer to the entangled photons with a specific frequency (e.g., the emission frequency). This unique behavior is theoretically discussed and the results show that using the lattice plasmon can change the transition rates by which the two emitted modes become entangled.
  • Article
    Citation - WoS: 1
    Citation - Scopus: 1
    Enhancing Quantum Correlation at Zero-If Band by Confining the Thermally Excited Photons: Inp Hemt Circuitry Effect
    (Springer, 2023) Salmanogli, Ahmad
    The microwave quantum correlation as a crucial issue in quantum technology is analyzed and studied. An open quantum system operating at 4.2 K is designed in which InP HEMT as the nonlinear component couples two external oscillators. The quantum theory is applied to analyze the system completely. The Lindblad Master equation is used to analyze the time evolution of the expanded closed system that covers the environmental effects. In the following, the state of the system defined is determined in terms of the ensemble average state using the density matrix; then, the ensemble average of the different operators is calculated. Accordingly, the covariance matrix of the quantum system is derived, and the quantum discord as a key quantity to determine the quantum correlation is calculated. As an interesting point, the results show that InP HEMT mixes two coupling oscillator modes so that the quantum correlation is created at different frequency productions, especially the zero-IF band. Nonetheless, the main point is that one can strongly manipulate the quantum correlation in the zero-IF using circuitry engineering. It is established by increasing the operational frequencies in the quantum system leading to dramatically limiting the thermal noise since the zero-IF band remains unchanged.
  • Article
    Citation - WoS: 17
    Citation - Scopus: 17
    Entanglement Sustainability Improvement Using Optoelectronic Converter in Quantum Radar (Interferometric Object-Sensing)
    (Ieee-inst Electrical Electronics Engineers inc, 2021) Salmanogli, Ahmad; Gokcen, Dincer
    In this study, the main focus is laid on the design of an optoelectronic converter as a part of the quantum radar to enhance the entanglement between retained and returned modes at high temperatures. The electro-opto-mechanical converter has been widely studied, and the results showed that the operation at high temperature is so crucial to generate and preserve the entanglement between modes. The main problem arises because the mechanical part operating at a low frequency leads to a large number of thermally excited photons, and eventually, the entanglement between modes becomes lost. To solve the problem, we replace the mechanical part with the optoelectronic components. The optical cavity is coupled to the microwave cavity in the newly designed system through a Varactor diode excited by a photodetector. As the main goal, to improve the entanglement sustainability, the effect of the coupling factor of the microwave cavity to photodetector is investigated. The results show that the mentioned factor creates some degrees of freedom to enhance the entanglement at high temperatures compared to the electro-opto-mechanical converter. At some specific values of the coupling factor, the retained and returned fields remained completely entangled up to 5.5 K and partially entangled around 50 K.
  • Article
    Citation - WoS: 8
    Citation - Scopus: 8
    Design of Quantum Sensor To Duplicate European Robins Navigational System
    (Elsevier Science Sa, 2021) Salmanogli, Ahmad; Gokcen, Dincer
    In this article, we design a quantum device to duplicate the European Robins procedure to precisely deter-mine the migratory route. In the mentioned procedure, the important issue is the geomagnetic field effect on the magnetic momentum of the created radical pairs (triplet-singlet states) dancing with a special fre-quency. To duplicate the procedure, a quantum sensor consisting of two coincident tripartite systems is designed. Each tripartite system is independently excited with the entangled photons (signal and idler). The interesting point is that by manipulation of the system in the right condition, the microwave cavities modes separately affected by the entangled photons can be entangled. The entangled microwave photons play the same role as the triplet-singlet states present in the bird's navigational system. The key point in the design of the quantum sensor is that the entanglement between microwave photons can be strongly affected by the external magnetic field. In fact, this is the criterion employed by the quantum sensor to sense the magnetic field intensity and the direction. To analyze the system, the canonical quantization (or microscopic) method is used to determine the sensor's Hamiltonian, and also the system dynamics equations of motions are analytically derived using Heisenberg-Langevin equations. (c) 2021 Elsevier B.V. All rights reserved.
  • Article
    Citation - WoS: 6
    Citation - Scopus: 7
    Optical and Microcavity Modes Entanglement by Means of Plasmonic Opto-Mechanical System
    (Ieee-inst Electrical Electronics Engineers inc, 2020) Salmanogli, Ahmad; Gecim, H. Selcuk
    In this study, plasmonic opto-mechanical tripartite system is proposed to improve the performance of the traditional tripartite opto-mechanical system. In the new design, significantly, optical cavity and microwave cavity modes are directly coupled to each other. The originality of this work consists in embedding a microsphere in the optical cavity where the plasmon-plasmon interaction between the metal plates generates a plasmon mode inside the optical cavity and changes the electric field distribution. The plasmonic property influences the microsphere electrical properties and interacts with the photonic mode inside the optical cavity by which the microwave cavity properties are also affected through coupling to the optical cavity. Microsphere introduces a capacitor as a function of plasmonic properties that can strongly influence the microwave cavity resonance frequency. That is the feature that we want to utilize to enhance the performance of the system at high temperature. The results show that the optical cavity and microwave cavity modes remain entangled at high temperature. It is contributed to the plasmonic-based capacitor induced by the microsphere which is not affected by the thermally induced photons (noise). It is worth mentioning that the induced noise strongly restricts the traditional tripartite system operated with a wide bandwidth.
  • Article
    Citation - WoS: 16
    Citation - Scopus: 23
    Entanglement Sustainability in Quantum Radar
    (IEEE-Inst Electrical Electronics Engineers Inc, 2020) Gokcen, Dincer; Gecim, H. Selcuk; Salmanogli, Ahmad
    In this study, some important parts of a quantum radar are designed using the quantum electrodynamics theory and significantly focused on entanglement conservation. Quantum radar is generally defined as a detection sensor that utilizes the microwave photons like a classical radar and simultaneously employs quantum phenomena to improve detection, identification, and resolution capabilities. However, the entanglement is so fragile, unstable, and difficult to preserve for a long time. Also, more importantly, the entangled states have a tendency to leak away due to the noise. The points mentioned enforces that the entangled states should be carefully studied at each step of the quantum radar detection processes such as the creation of the entangled photons in the tripartite system, the amplification of the photons, the propagation into the atmosphere, and the reflection from the target. At each step, the parameters related to the real mediums and target material can affect the entangled states to leak away easily. The results of simulations indicate that the features of the tripartite system and amplifier are so important to lead the detected photons to remain entangled with the optical modes. Nonetheless, it is found that a lot of entangled photons lose the related non-classical correlation.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 5
    Plasmonic Effect on Quantum-Dot Photodetector Responsivity
    (Ieee-inst Electrical Electronics Engineers inc, 2019) Salmanogli, Ahmad; Gokcen, Dincer; Gecim, H. Selcuk; Selcuk Gecim, H.
    In this paper, we analyze and simulate the plasmonic effect on the quantum-dot photodetector responsivity. For this purpose, a plasmonic-based quantum-dot photodetector is designed in which a few quantum dots are embedded in the hot-spot regions of the plasmonic nanoparticles, wherein a high-intensity localized field is created. Notably, due to the maximum overlapping of the plasmonic field with the quantum dots at the hot spot, some of the optical characteristics of the quantum dot, particularly the spontaneous emission decay rate, are changed. This paper focuses on the engineering of the decay rate, through which we found that the quantum-dot photodetector responsivity is strongly enhanced with the order of 100 times at the visible range. For analyzing the proposed system, we first work on the plasmonic effect of the nanoparticle on the quantum-dot lifetime using the Heisenberg-Langevin equations. It is shown that by embedding the quantum dots at the hot spot of the nanoparticle, the decay rate of the quantum dot is dramatically influenced. In the following, plasmonic-quantum dot system responsivity is theoretically examined using a time-varying perturbation theory. Using this approach is necessary because the spontaneous emission cannot be analyzed with the classical methods. Consequently, it is proved that using plasmonic effect leads to enhanced photodetector responsivity, suggesting that even very small incoming signals are detectable.
  • Article
    Citation - WoS: 7
    Citation - Scopus: 7
    Plasmonic System as a Compound Eye: Image Point-Spread Function Enhancing by Entanglement
    (Ieee-inst Electrical Electronics Engineers inc, 2018) Salmanogli, Ahmad; Gecim, H. Selcuk; Piskin, Erhan
    In this paper, we introduce a plasmonic system that can operate as a compound eye. Based on the advantages mentioned in some previous works for the compound eye, we designed a plasmonic system that contains faraway plasmonic nanoparticles (NPs) that act independently like an ommatidium in the compound eye. This plasmonic system performance is analyzed with full quantum theory by which it is theoretically proved that with the interaction of light with NPs, the scattering light, and generated phonon can be entangled due to the NPs Ohmic loss. Consequently, the quantum states of the system before, after, and during the absorption and scattering of the incident photon, were quantum mechanically subjected. By the introduced theoretical formula and modeling results, it is shown that the plasmonic system can operate similar to the compound eye, if the critical parameters, such as system's focus point, NPs scattering angle, and inter-distance between NPs are suitably designed. More importantly, due to the entanglement between the scattering light and the generated phonon, it is theoretically proved that the point-spread function is improved when the traditional lens in the compound eye is replaced by the plasmonic NPs leading to an enhanced image resolution. Finally, a simple conceptual design of the plasmonic system is presented and then a few contributed modeling results are introduced.