Mekatronik Mühendisliği Bölümü Yayın Koleksiyonu

Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/255

Browse

Filters

2010 - 201975

Settings

Start date: 2010End date: 2019

Search Results

Now showing 1 - 10 of 75
  • Article
    Citation - WoS: 9
    Citation - Scopus: 10
    Effect of Use of Cu-Cr P/M Electrodes on Machining Performance of Electric Discharge Machining
    (Gazi Univ, Fac Engineering Architecture, 2015) Gulcan, Orhan; Çoğun, Can; Uslan, Ibrahim; Usta, Yusuf; Cogun, Can; Çoʇun, Can; Mekatronik Mühendisliği
    In this study, the effect of use of Cu-Cr powder metal (P/M) electrodes on EDM performance outputs, namely material removal rate (MRR), electrode wear rate (EWR), mean and maximum roughness of machined surface (R-a and R-z) and workpiece surface recast layer thickness, was investigated experimentally. The Cu-Cr P/M electrodes produced at different mixing ratios, compacting pressures and sintering temperatures were used to machine SAE 1040 steel. The analyses performed have shown that the electrode material is deposited on to the work surface as a layer and the powder mixing ratio, the compaction pressure and sintering temperature affect the EDM performance outputs.
  • Article
    Citation - WoS: 4
    Citation - Scopus: 4
    Influence of the Material Properties on the Elastic-Plastic Deformation in a Heat Generating Composite Solid Cylinder
    (Gazi Univ, Fac Engineering Architecture, 2013) Ozturk, Ali; Gülgeç, Müfit; Gulgec, Mufit; Mekatronik Mühendisliği
    Based on Tresca's yield criterion and its associated flow rule, the elastic-plastic deformation of a centrally heated composite cylinder with fixed ends is investigated by considering the influence of geometric parameters as well as material properties such as yield strength, modulus of elasticity, Poisson's ratio, coefficient of thermal conduction and thermal expansion. In the study, stress, strain and displacement distributions in the composite cylinder made of elastic-perfectly plastic material are derived. Stress distribution and evolution of plastic regions in the composite are presented for different levels of heat generation in the core.
  • Conference Object
    Fluorescent On-Chip Imager by Using a Tunable Absorption Filter
    (Ieee, 2017) Arpali, Caglar; Yıldırım, Ender; Yildirim, Ender; Arpali, Çağlar; Arpali, Serap Altay; Arpali, Serap; Makine Mühendisliği; Mekatronik Mühendisliği; Elektronik ve Haberleşme Mühendisliği
  • Conference Object
    High-Throughput Screening of Blood Samples Based on Structured Illumination On-Chip Imaging
    (IEEE, 2013) Arpali, Serap; Arpali, S.A.; Arpali, Çağlar; Arpali, C.; Coskun, A.F.; Chiang, H.-H.; Ozcan, A.; Mekatronik Mühendisliği; Elektronik ve Haberleşme Mühendisliği
    We demonstrate a high-throughput fluorescent on-chip imaging platform, using structured illumination that can rapidly screen large volumes of scattering media such as undiluted whole blood samples (e.g., ~ 0.3-0.7 mL) for detection of fluorescent micro-objects at low concentrations (e.g.,≤50-100 particles/mL). This imaging modality might especially be useful for rare cell applications involving whole blood samples, such as detection of circulating tumor cells. © 2013 OSA.
  • Conference Object
    Citation - Scopus: 2
    An Optimization Model To Coordinate Scheduling and Controling in Projects: Case With Instantaneous Control Constraints
    (National Technical University of Athens, 2014) Schmıdt, Klaus Werner; Hazir, Ö.; Schmidt, K.W.; Eryilmaz, U.; Mekatronik Mühendisliği
    Today, many enterprises in different industries take part in various projects, and organizational performances depend more and more on project performances. In order to maximize performance, effective management of project functions is crucial. In this regard, we focus on scheduling and control functions and their relation. Characteristics of data sharing among them and possible integration strategies are theoretically investigated. A model base for a decision support framework that accounts for these interdependencies and supports managers is developed. To solve the formulated integrated project scheduling and control problem, a tabu search algorithm is combined with optimal control techniques. As a result, a project schedule as well as the means and timing of interventions are determined such that the project cost is minimized. The obtained results are supported by computational experiments. Integrated models and algorithms to be developed aim to fill an important theoretical gap in project management.
  • Article
    A Parametric Study on the Elastic-Plastic Deformation of a Centrally Heated Two-Layered Composite Cylinder With Free Ends
    (Polish Acad Sciences inst Fundamental Technological Research, 2016) Yalcin, F.; Gülgeç, Müfit; Ozturk, A.; Gulgec, M.; Mekatronik Mühendisliği
    In this paper, an elastic-plastic deformation of a centrally heated two-layered composite cylinder with free ends subjected to uniformly distributed internal energy generation within an inner cylinder is studied using Tresca's yield condition and its associated flow rule. Stress, strain and displacement distributions in the composite cylinder made of elastic-perfectly plastic material are derived considering the influence of geometric parameters as well as material properties such as yield strength, modulus of elasticity, Poisson's ratio, coefficient of thermal conduction and coefficient of thermal expansion. Yielding starts at the outer boundary or at the axis corresponding to an 'edge regime' of Tresca's prism in both cases. Propagations of the plastic regions are studied due to an increase of a heat generation.
  • Conference Object
    Investigation of Electrical Discharge Drilling (EDD) Performance of Ti-6Al4V Super Alloy
    (2018) Erdem, Oğuz; Çoğun, Can; Uslan, İbrahim
    Ti-6Al-4V super alloy (Ti64) is widely used in many engineering applications such as automotive, aviation and aerospace owing to its low density and high strength properties. Because of its high toughness and high melting temperature, Ti64 is regarded as a difficult-to-machine material in conventional machining. Furthermore, it is also difficult to machine in Electrical Discharge Drilling (EDD) due to its high electrical resistance and low thermal conductivity. The EDD performance is quantified by material removal rate (MRR), electrode wear rate (EWR), relative wear (RW), surface roughness (SR) and surface characteristic of drilled workpiece. The main goal of this study is to experimentally investigate the performance outputs (MRR, EWR, RW and SR) of Ti64 super alloy in EDD operation.
  • Conference Object
    Image-Based Remote Control Using FPGA
    (2014) Bingöl, Hilal; Kısa Işık, Gizay; Başayar, Tuğba; Genç, Fatih; Yengel, Emre
  • Conference Object
    Elektrolitik ve alaşım bakır elektrotların elektro-erozyon ile işleme performansına etkisi
    (2014) Çoğun, Can; Şimşek, Ülke
    Elektro erozyon ile işlemenin (EEİ) en önemli maliyet unsuru elektrotun üretilmesidir. EEİ’de en yaygın kullanılan elektrot malzemeleri bakır ve alaşımlarıdır. Maliyeti arttırmadan EEİ yapmanın yolu, hammadde maliyeti düşük, işlemesi kolay ve elektriksel aşınma direnci yüksek bakır alaşımlarını tespit etmektir. Bu çalışmada, EEİ’de elektrot olarak kullanılan elektrolitik bakır, CuCr1Zr ve CuCo2Be bakır alaşımları için işleme hızı, elektrot aşınma hızı, bağıl aşınma ve işparçası yüzey pürüzlülüğü gibi performans çıktıları deneysel olarak incelenmiştir. Ayrıca, CuCr1Zr alaşımına uygulanan yaşlandırma işlemi sonrası artan elektriksel iletkenliğin EEİ performans çıktılarına etkileri incelenmiştir. Performans çıktılarının alaşım türünden ve uygulanan yaşlandırma işleminden etkilendiği görülmüştür.
  • Conference Object