WoS İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/8653
Browse
15 results
Search Results
Article A Novel Hypercube-Based Approach To Overlay Design Algorithms on Topic Distribution Networks(Gazi Univ, 2022) Yumusak, Semih; Hassanpour, Reza; Layazali, Sina; Oztoprak, Kasim; Hassanpour, Reza; Yazılım MühendisliğiData communication in peer-to-peer (P2P) network requires a fine-grained optimization for memory and processing to lower the total energy consumption. When the concept of Publish/subscribe (Pub/Sub) systems were used as a communication tool in a P2P network, the network required additional optimization algorithms to reduce the complexity. The major difficulty for such networks was creating an overlay design algorithm (ODA) to define the communication patterns. Although some ODAs may perform worse on a high-scale, some may have better average/maximum node degrees. Based on the experimentation and previous works, this study designed an algorithm called the Hypercube-ODA, which reduces the average/maximum node degree for a topic connected Pub/Sub network. The Hypercube-ODA algorithm creates the overlay network by creating random cubes within the network and arranging the nodes with the cubes they belong to. In this paper, the details of the proposed Hypercube algorithm were presented and its performance was compared with the existing ODAs. Results from the experiments indicate that the proposed method outperforms other ODA methods in terms of lower average node degree (lowering the average node degree by up to 60%).Article Citation - WoS: 1Using Text Mining for Research Trends in Empirical Software Engineering(Gazi Univ, 2021) Tokdemir, GulThis paper intends to examine the research trends in Empirical Software Engineering domain within the last two decades using text mining. It studies published articles in the relevant literature with an emphasis on abstracts of 10658 articles published in the literature on Experimental Software Engineering domain. Using a probabilistic topic modelling technique (Latent Dirichlet Allocation), it brings forward the main topics of research within this domain. By further analysis, the paper evaluates the changes of focus in published works in the last two decades and depicts the recent trends in research content wise. Through a timely comparison, it portrays the alteration of interest within empirical software engineering research and proposes a future research agenda to develop an advanced field, beneficial both for academics and practitioners.Article Citation - WoS: 2Citation - Scopus: 2Analysis of Heat Transfer Enhancement in Tubes With Capsule Dimpled Surfaces and Al2o3-Water Nanofluid(Turkish Soc thermal Sciences Technology, 2022) Ibrahim, Mahmoud Awni A. Haj; Turkoglu, Hasmet; Yapici, Ekin Ozgirgin; Haj Ibrahim, Mahmoud Awni A.This study aims to numerically investigate and evaluate the enhancement of heat transfer by new capsule dimples on tube surfaces for flow of water and Al2O3-water nanofluid with different concentrations, under uniform surface heat flux. The originality of this work lies in combining two passive heat transfer enhancement methods such as geometrical improvements and nanofluids together. Capsule dimples with different depths were considered. Al2O3- water nanofluid was modeled as a single-phase flow based on the mixture properties. The effects of dimple depth and nanoparticle concentrations on Nusselt number, friction factor and performance evaluation criteria (PEC) were studied. Numerical computations were performed using ANSYS Fluent commercial software for 2000-14000 Reynolds number range. It was found that when laminar, transient and fully developed turbulent flow cases are considered, increase in the dimple depth increases the Nusselt number and friction factor for both pure water and Al2O3-water nanofluids cases. Also, the friction factor increases as dimple depth increases. Results show that increase in PEC is more pronounced in the laminar region than in the transition region, it starts to decrease for turbulent flows. For nanofluid, PEC values are considerably higher than pure water cases. The variation of PEC for capsule dimpled tubes are dependent on flow regimes and dimple depths. Increasing the nano particle volume concentration and dimple depth in laminar flows increase the PEC significantly.Article Industry 4.0 Readiness of SMEs: Active Participants or Silent Audience of the Revolution?(Sosyoekonomi Soc, 2023) Karapolatgil, Ahmet Anıl; Sener, IrgeGünümüzde Dördüncü Sanayi Devriminin teknolojik sonuçları tüm örgütleri etkilemektedir. Fakat KOBİ’lerin güncel tepkileri nadiren araştırılmıştır. Bu nedenle, bu çalışmada KOBİ’lerin güncel konumlarına odaklanılmış ve Endüstri 4.0 teknolojileri karşısındaki hazırlıklarının ve farkındalıklarının tespiti amaçlanmıştır. Çalışmanın örneklemini oluşturan Ankara’da faaliyet gösteren 44 KOBİ yöneticisi ile yarı yapılandırılmış mülakatlar gerçekleştirilmiş olup, içerik analizi ile 3 ana tema belirlenmiştir. Araştırmanın bulguları belirlenen ana temalar kapsamında incelenmiştir. Bu kapsamda, örneklemde yer alan KOBİ’lerin Endüstri 4.0 için düşük farkındalığa sahip oldukları ve hazırlıklarının yetersiz olduğu sonucuna ulaşılmıştır.Article Citation - WoS: 12Citation - Scopus: 19Artificial Intelligence Applications in Earthquake Resistant Architectural Design: Determination of Irregular Structural Systems With Deep Learning and Imageai Method(Gazi Univ, Fac Engineering Architecture, 2020) Bingol, Kaan; Akan, Asli Er; Ormecioglu, Hilal Tugba; Er, ArzuAlthough the architectural design process is carried out with the collaboration of experts who are experienced in many different areas from the main preferences to the detailing stage, the major decisions such as plan organization, mass design etc. are taken by the architect. Computer Aided Design (CAD) programs are generally effective after the major decisions of the design are taken. For this reason, it is common for the main decisions, taken during the design process, to be changed during the analysis of the structural system. In order to prevent this, in the early stages of architectural design, earthquake system awareness and structural system design should be included as an design input; as, the failure of the structural system which did not considered well in the architectural design phase leads to unexpected revisions in the implementation project phase and thus leads to serious losses in both time and cost. The aim of this study is to create an Irregularity Control Assistant (IC Assitant) that can provide architects general information about the appropriateness of structural system decisions to earthquake regulations in the early stages of design process by using the deep learning and image processing methods. In this way, correct decisions will be made in the early stages of the design and unexpected revisions that may occur during the implementation project phase will be prevented.Article Line-Of Rate Construction for a Roll-Pitch Gimbal Via a Virtual Pitch-Yaw Gimbal(Tubitak Scientific & Technological Research Council Turkey, 2021) Cifdaloz, OguzhanIn this paper, a method to construct the line of sight rate of a target with a roll-pitch gimbal and tracker is described. Construction of line-of-sight rate is performed via utilizing a virtual pitch-yaw gimbal. Kinematics of both the roll-pitch and pitch-yaw gimbals are described. A dynamical model for the roll-pitch gimbal is developed, and a nested control structure is designed to control the angular rates and line of sight angles. A kinematic model of the tracker is developed and a tracker controller is designed to keep the target in the field of view. Conversion equations between roll-pitch and pitch-yaw gimbal configurations are provided. Finally, constructed line of sight rates are compared to true line of sight rates via simulations. Obtained results indicate that the constructed line of sight rates pertaining to a target satisfactorily converge to the actual line of sight rates.Article Citation - WoS: 1Citation - Scopus: 2Classification of Low Probability of Intercept Radar Waveforms Using Gabor Wavelets(Gazi Univ, Fac Engineering Architecture, 2021) Ergezer, HalitLow Probability of Intercept (LPI Radar) is a class of radar with specific technical characteristics that make it very difficult to intercept with electronic support systems and radar warning receivers. Because of their properties as low power, variable frequency, wide bandwidth, LPI radar waveforms are difficult to intercept by ESM systems. In recent years, studies on the classification of waveforms used by these types of radar have been accelerated. In this study, Time-Frequency Images (TFI) has been obtained from the LPI radars waveforms by using Choi-Williams Distribution method. From these images, feature vectors have been generated using Gabor Wavelet transform. In contrast to many methods in the literature, waveform classification has been performed by directly comparing the feature vectors obtained without using any machine learning method. With the method we propose, classification accuracies were obtained at intervals of 2 dB between -20 dB and 10 dB and performed at reasonable classification accuracy rates up to -8 dB SNR value. Better results than the best reported in the literature were obtained for some signal types. The results obtained for all waveform types are given in comparison with the results of the existing methods in the literature.Article Citation - WoS: 4Citation - Scopus: 5An Algebraic Stability Test for Fractional Order Time Delay Systems(Ramazan Yaman, 2020) Baleanu, Dumitru; Ozyetkin, Munevver MineIn this study, an algebraic stability test procedure is presented for fractionalorder time delay systems. This method is based on the principle of eliminatingtime delay. The stability test of fractional order systems cannot be examineddirectly using classical methods such as Routh-Hurwitz, because such systemsdo not have analytical solutions. When a system contains the square roots ofs, it is seen that there is a double value function of s. In this study, a stabilitytest procedure is applied to systems including ps and/or different fractionaldegrees such as s where 0 < α < 1, and αǫR. For this purpose, the integerorder equivalents of fractional order terms are first used and then the stabilitytest is applied to the system by eliminating time delay. Thanks to the proposedmethod , it is not necessary to use approximations instead of time delay termsuch as Pad´e. Thus, the stability test procedure does not require the solutionof higher order equations.Article Citation - WoS: 3Citation - Scopus: 3Filter Design for Small Target Detection on Infrared Imagery Using Normalized-Cross Layer(Tubitak Scientific & Technological Research Council Turkey, 2020) Demir, H. Seckin; Akagunduz, ErdemIn this paper, we introduce a machine learning approach to the problem of infrared small target detection filter design. For this purpose, similar to a convolutional layer of a neural network, the normalized-cross-correlational (NCC) layer, which we utilize for designing a target detection/recognition filter bank, is proposed. By employing the NCC layer in a neural network structure, we introduce a framework, in which supervised training is used to calculate the optimal filter shape and the optimum number of filters required for a specific target detection/recognition task on infrared images. We also propose the mean-absolute-deviation NCC (MAD-NCC) layer, an efficient implementation of the proposed NCC layer, designed especially for FPGA systems, in which square root operations are avoided for real-time computation. As a case study we work on dim-target detection on midwave infrared imagery and obtain the filters that can discriminate a dim target from various types of background clutter, specific to our operational concept.Article Citation - WoS: 13Citation - Scopus: 16Modeling the Impact of Temperature on Fractional Order Dengue Model With Vertical Transmission(Ramazan Yaman, 2020) Defterli, OzlemA dengue epidemic model with fractional order derivative is formulated to an-alyze the effect of temperature on the spread of the vector-host transmitted dengue disease. The model is composed of a system of fractional order differ-ential equations formulated within Caputo fractional operator. The stability of the equilibrium points of the considered dengue model is studied. The cor-responding basic reproduction number R alpha 0 is derived and it is proved that if R alpha 0 < 1, the disease-free equilibrium (DFE) is locally asymptotically stable. L1 method is applied to solve the dengue model numerically. Finally, numerical simulations are also presented to illustrate the analytical results showing the influence of the temperature on the dynamics of the vector-host interaction in dengue epidemics.