Bilgilendirme: Kurulum ve veri kapsamındaki çalışmalar devam etmektedir. Göstereceğiniz anlayış için teşekkür ederiz.

Makine Mühendisliği Bölümü

Permanent URI for this communityhttps://hdl.handle.net/20.500.12416/19

Browse

Browsing Makine Mühendisliği Bölümü by browse.metadata.publisher "Gazi Univ, Fac Engineering Architecture"

Filter results by typing the first few letters
Now showing 1 - 3 of 3
  • Thumbnail Image
    Article
    Citation - WoS: 7
    Citation - Scopus: 7
    Development and Experimental Investigation of Electrochemical Drilling Method Using Rotary Tube Tool
    (Gazi Univ, Fac Engineering Architecture, 2013) Ozerkan, H. Bekir; Çoğun, Can; Cogun, Can; Mekatronik Mühendisliği
    In this study, a new hybrid electrochemical drilling (ECD) method, based on electrochemical machining in nonconventional machining processes, was developed. In the developed method, tube tool makes rotary motion together with inner through hole flushing. A small scale prototype ECD machine has been designed and manufactured to test the developed method. One of the important features of the new system is the regulation of tool feed rate using current feedback control. The Hadfield (manganese) steel, whose strain hardening behavior makes it very difficult to machine with conventional methods, and AISI 1040 steel, whose machinability is fairly good, were drilled using the prototype machine and results were compared. Workpiece material removal rate increased with the increasing machining voltage, tool rotational speed, electrolyte concentration and flushing pressure in both types of steels. Average radial overcut values increased with the rotational speed of the tool. The AISI 1040 steel hole geometries were regular than that of Hadfield steel. Experimental results showed that deep holes can be drilled successfully with the proposed hybrid ECD method.
  • Thumbnail Image
    Article
    Citation - WoS: 3
    Citation - Scopus: 3
    Empirical and Statistical Modeling of Heat Loss From Surface of a Cement Rotary Kiln System
    (Gazi Univ, Fac Engineering Architecture, 2013) Simsek, Baris; Altunok, Taner; Simsek, Emir H.; Altunok, Taner; Makine Mühendisliği
    In branches of industry too much energy consuming such as cement sector, controlled use of energy, only it is possible to know how energy is distributed in the system. In cement production process, a large portion of the heat losses which is due to energy consumption consist of convection and radiation heat losses from the surface of rotary kiln. In this study, empirical equation was derived for heat loss from surface of rotary kiln in a cement factory using empirical equations and statistical modeling techniques by the help of temperatures measured surface of rotary kiln. Measured with thermal cameras and the data necessary for experimental modeling was obtained the factory central control room. Total heat loss of system was calculated using Matlab. Statistical analysis related to results was carried out by Minitab 15.1.1 program. It was concluded that heat losses throughout rotary kiln increased toward the center of the kiln.
  • Thumbnail Image
    Article
    Citation - WoS: 3
    Citation - Scopus: 4
    Numerical Analysis of a Commercial Display Cabinet With Air Curtain
    (Gazi Univ, Fac Engineering Architecture, 2011) Caliskan, Sinan; Altunok, Taner; Altunok, Taner; Baskaya, Senol; Gungunes, H. Murat; Makine Mühendisliği
    Maintaining food temperatures below critical values is the important maximising the high quality display life of chilled foods. Air curtains are especially used in stores and retailer supermarkets as barrier systems to seperate inner and outer spaces from each other. For both air quality and energy saving, it is crucial that the air transfer between these two spaces are at minimum. Minimization of air transfer between inner and outer spaces, not only decreases heat transfer but also stabilizes the humidity balance. In this study, numerical analysis of a commercial display cabinet has been carried out. For this purpose PHOENICS, a computational fluid dynamics code, is utilized. Optimum jet system conditions for each of the one jet, two jet and there jet systems has been modified according to temperature change of the air, and comparisons among them have been made. The results indicate that, the results the both CFD analysis and experimental results are almost equal and refrigeration systems with three jets is required to obtain the necessary temperature values to keep products fresh in display cabinets, especially because they can distribute temperature in a homogeneous way, meaning that the temperature value is the best ideal system at every point in the cabinet with three jets.