Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/8651
Browse
54 results
Search Results
Article Machine Learning-Based Efficiency Prediction of Francis Type Hydraulic Turbines Through Comprehensive Performance Testing(Sage Publications Ltd, 2025) Besni, Ferdi; Buyuksolak, Fevzi; Ayli, Ece; Celebioglu, Kutay; Aradag, Selin; Tascioglu, YigitIn this study, the rehabilitation works carried out for the KEPEZ HPP, which has been in operation for over 50 years in Antalya, Turkey, is discussed. Within this scope, the existing turbine components are optimized using the CFD method, and a design that provides higher performance at the required flow rate and head is obtained. Analyses are performed using numerical methods to examine the behavior of the new turbine at different flow rates and heads, and a hill chart is created. In the second stage, model tests are carried out at the TOBB ETU HYDRO Water Turbine Design and Test Center in accordance with IEC60193 standards. Different ML methods are examined for their ability to predict turbine performance, following the development of the hydrid CFD-Experimental methodology. According to the authors knowledge, there is no study in the literature that combines experimental, numerical, and ML methods for turbines, and ML methods have not been applied before for Francis-type turbine performance prediction. The outcomes of the study contribute to the advancement of turbine design and optimization processes, offering valuable insights for the successful implementation of rehabilitation projects in the hydropower sector.Article Citation - WoS: 1Citation - Scopus: 1Performance Analysis of Dielectric Application Methods in Electrical Discharge Machining(Sage Publications Ltd, 2025) Cogun, Can; Tosun, NihatA lack of comprehensive research exists on the machining performance of the reciprocating electrode method (REM) compared to other dielectric application methods (DAMs), particularly the commonly used side flushing method (SFM) in electric discharge machining. This study aims to investigate the performance outputs of the two methods under varying machining parameters through experimental and statistical analysis to fill the gap in the field. The impact of each machining parameter and DAM on the critical performance outputs was also determined using the analysis of variance (ANOVA). The study employed signal-to-noise ratio analysis to ascertain the optimal machining parameter settings. It has been demonstrated that the REM has several advantages over the SFM, including a 2-25% reduction in average surface roughness, a 5-70% decrease in electrode wear rate, a smoother workpiece surface, and sharper edges. However, the SFM exhibits a higher workpiece removal rate and less relative wear (RW) than the REM. The ANOVA revealed that the primary factor influencing the RW was the pulse time, followed by the discharge current and the DAM. Similarly, the discharge current was the primary factor affecting the average roughness and mean spacing between successive profile peaks, followed by the pulse time.Article Citation - WoS: 4Citation - Scopus: 3On Generalized Asymmetric Harmonic Oscillator With Quadratic Nonlinearity Within Fractional Variational Principles(Sage Publications Ltd, 2024) Baleanu, Dumitru; Jajarmi, Amin; Defterli, Ozlem; Mohammad, Noorhan F. AlShaikh; Asad, Jihad; AlShaikh Mohammad, Noorhan FThis work studies the nonlinear fractional dynamics of asymmetric harmonic oscillators. The classical description of the physical system is generalized using the principles of fractional variational analysis. As a system of two-coupled fractional differential equations with a quadratic nonlinear component, the fractional Euler-Lagrange equations of the motion of the corresponding system are obtained. The Adams-Bashforth predictor-corrector numerical approach is used to approximate the system's outcomes, which are then simulated comparatively with respect to various model parameter values, including mass, linear and quadratic nonlinear stiffness, and the order of the fractional derivative. The simulations provided the possibility of investigating various dynamical behaviours within the same physical model that is generalized by the use of fractional operators.Article Enhancing Efficiency of an Old Hydropower Plant Turbine Through a Mutual Runner Design and Component Optimization(Sage Publications Ltd, 2025) Seydim, Sila; Yildirim, Gozde; Ulucak, Oguzhan; Buyuksolak, Fevzi; Ejder, Beril; Kantar, Ece Nil; Celebioglu, KutayThis paper presents a systematic approach to the rehabilitation process of Sar & imath;yar HEPP, a hydroelectric power plant that has been operational for more than 50 years. Units 1 and 2 (U1-U2) were originally designed with a head of 93 m and a turbine power of 48.5 MW, while Units 3 and 4 (U3-U4) were designed with a lower head of 76.5 m but the same turbine power of 48.5 MW. A methodology combining reverse engineering and CFD analysis is developed to identify and evaluate the critical parameters that have an impact on the existing turbine performance. A hybrid design is proposed to replace the existing two different types of turbines, which reduces manufacturing costs and design time. The performance of the new hybrid design is evaluated in detail with CFD analysis. For both existing and hybrid design, steady and unsteady analyses are performed. For all of the situations hill charts are obtained and the comparison of the old and new hybrid design is discussed in detail. The results show that the new design has improved the efficiency of the turbine and the power plant, resulting in a 14.2% efficiency increase in U1-U2 and a 21% system efficiency improvement in U3-U4. This study provides a guide to designers and practitioners for the rehabilitation of hydroelectric power plants.Article Citation - WoS: 2Citation - Scopus: 1Exploring the Potential of Artificial Intelligence Tools in Enhancing the Performance of an Inline Pipe Turbine(Sage Publications Ltd, 2024) Celebioglu, Kutay; Ayli, Ece; Cetinturk, Huseyin; Tascioglu, Yigit; Aradag, SelinIn this study, investigations were conducted using computational fluid dynamics (CFD) to assess the applicability of a Francis-type water turbine within a pipe. The objective of the study is to determine the feasibility of implementing a turbine within a pipe and enhance its performance values within the operating range. The turbine within the pipe occupies significantly less space in hydroelectric power plants since a spiral casing is not used to distribute the flow to stationary vanes. Consequently, production and assembly costs can be reduced. Hence, there is a broad scope for application, particularly in small and medium-scale hydroelectric power plants. According to the results, the efficiency value increases on average by approximately 1.5% compared to conventional design, and it operates with higher efficiencies over a wider flow rate range. In the second part of the study, machine learning was employed for the efficiency prediction of an inline-type turbine. An appropriate Artificial Neural Network (ANN) architecture was initially obtained, with the Bayesian Regularization training algorithm proving to be the best approach for this type of problem. When the suitable ANN architecture was utilized, the prediction was found to be in good agreement with CFD, with an root mean squared error value of 0.194. An R2 value of 0.99631 was achieved with the appropriate ANN architecture.Article Citation - WoS: 10Citation - Scopus: 11Analysis of Heat Transfer Enhancement of Passive Methods in Tubes With Machine Learning(Sage Publications Ltd, 2024) Ayli, Ece; Turkoglu, Hasmet; Yapici, Ekin Ozgirgin; Özgirgin Yapıcı, EkinThis study investigates the efficacy of machine learning techniques and correlation methods for predicting heat transfer performance in a dimpled tube under varying flow conditions, including the presence of nanoparticles. A comprehensive numerical analysis involving 120 cases was conducted to obtain Nusselt numbers and friction factors, considering different dimple depths and velocities for both pure water and water-Al2O3 nanofluid at 1%, 2%, and 3% volume concentrations. Utilizing the data acquired from the numerical simulations, a correlation equation, SVM ANN architectures were developed. The predictive capabilities of the statistical approach, ANN, and SVM models for Nusselt number distribution and friction factor were meticulously assessed through mean average percentage error (MAPE) and correlation coefficients (R2). The research findings reveal that machine learning techniques offer a highly effective approach for accurately predicting heat transfer performance in a dimpled tube, with results closely aligned with Computational Fluid Dynamics (CFD) simulations. Particularly noteworthy is the superior performance of the ANN model, demonstrating the most precise predictions with an error rate of 2.54% and an impressive R2 value of 0.9978 for Nusselt number prediction. In comparison, the regression model achieved an average error rate of 6.14% with an R2 value of 0.8623, and the SVM model yielded an RMSE value of 2.984% with an R2 value of 0.9154 for Nusselt number prediction. These outcomes underscore the ANN model's ability to effectively capture complex patterns within the data, resulting in highly accurate predictions. In conclusion, this research showcases the promising potential of machine learning techniques in accurately forecasting heat transfer performance in dimpled tubes. The developed ANN model exhibits notable superiority in predicting Nusselt numbers, making it a valuable tool for enhancing thermal system analyses and engineering design optimization.Article Citation - WoS: 7Citation - Scopus: 8On the New Hadamard Fractional Optimal Control Problems(Sage Publications Ltd, 2023) Tajani, Asmae; Jajarmi, Amin; Baleanu, Dumitru; Zguaid, KhalidThe main goal of this manuscript is to investigate a fractional optimal control problem subject to a dynamical system involving Hadamard fractional derivatives. Necessary conditions for the optimality of the considered problem are derived in terms of the corresponding Euler-Lagrange equations. An iterative method is also proposed to numerically solve the obtained equations from the necessary optimality conditions. Two illustrative examples are considered and simulated in order to show the applicability and efficiency of the proposed method. Numerical simulations show that the used method presents some satisfying results regarding the absolute error values.Article Citation - WoS: 4Citation - Scopus: 4Investigation of Aerodynamic and Aeroacoustic Behavior of Bio-Inspired Airfoils With Numerical and Experimental Methods(Sage Publications Ltd, 2024) Kocak, Eyup; Aradag, Selin; Guzey, Kaan; Ayli, Ulku EceThis article presents numerical and experimental studies on the aerodynamic and aeroacoustic characteristics of the NACA0012 profile with owl-inspired leading-edge serrations for aeroacoustic control. The leading-edge serrations under investigation are in a sinusoidal profile with two main design parameters of wavelength and amplitude. The noise-suppressing ability of sinusoidal serrations is a function of several parameters such as amplitude, wavelength, inflow speed, angle of attack, which are examined in this study. Amplitude (A) and wavelength (& lambda;) of the serration are varied between 1.25 and 2.5, 20 < & lambda; < 60, respectively. The corresponding Reynolds numbers are between 1 and 3 x 10(5). The angle of attack for each configuration is changed between 4 & DEG; and 16 & DEG;. Forty different configurations are tested. According to the results, owl-inspired leading-edge serrations can be used as aeroacoustic control add-ons in blade designs for wind turbines, aircraft, and fluid machinery. Results show that the narrower and sharper serrations have a better noise reduction effect. Overall sound pressure level (SPL) reduces up to 20% for the configuration with the largest amplitude and smaller wavelength. The results also showed that serration amplitude had a distinct effect on aeroacoustic performance, whereas wavelength is a function of amplitude. At the smaller angle of attack values, AOA < 8 & DEG;, the lift and drag coefficients are almost the same for both clean and wavy profiles. On the other hand, typically for angle of attack values more than 12 & DEG; (after stall), when the angle of attack is increased, serration adversely affects aerodynamic performance.Article Citation - WoS: 27Citation - Scopus: 28Fractional Investigation of Time-Dependent Mass Pendulum(Sage Publications Ltd, 2024) Defterli, Ozlem; Wannan, Rania; Sajjadi, Samaneh S.; Asad, Jihad H.; Baleanu, Dumitru; Jajarmi, AminIn this paper, we aim to study the dynamical behaviour of the motion for a simple pendulum with a mass decreasing exponentially in time. To examine this interesting system, we firstly obtain the classical Lagrangian and the Euler-Lagrange equation of the motion accordingly. Later, the generalized Lagrangian is constructed via non-integer order derivative operators. The corresponding non-integer Euler-Lagrange equation is derived, and the calculated approximate results are simulated with respect to different non-integer orders. Simulation results show that the motion of the pendulum with time-dependent mass exhibits interesting dynamical behaviours, such as oscillatory and non-oscillatory motions, and the nature of the motion depends on the order of non-integer derivative; they also demonstrate that utilizing the fractional Lagrangian approach yields a model that is both valid and flexible, displaying various properties of the physical system under investigation. This approach provides a significant advantage in understanding complex phenomena, which cannot be achieved through classical Lagrangian methods. Indeed, the system characteristics, such as overshoot, settling time, and peak time, vary in the fractional case by changing the value of & alpha;. Also, the classical formulation is recovered by the corresponding fractional model when & alpha; tends to 1, while their output specifications are completely different. These successful achievements demonstrate diverse properties of physical systems, enhancing the adaptability and effectiveness of the proposed scheme for modelling complex dynamics.Article Citation - WoS: 24Citation - Scopus: 28Behavior of Glulam Timber Beam Strengthened With Carbon Fiber Reinforced Polymer Strip for Flexural Loading(Sage Publications Ltd, 2021) Isleyen, ummu K.; Ghoroubi, Rahim; Mercimek, Omer; Anil, Ozgur; Erdem, Recep TugrulIn the last 20 years, the use of wooden structures and their dimensions have gradually increased. The wood application has increased in different structures such as multistory buildings, sports, industrial facilities, road and railway bridges, power transmission lines, and towers. The widespread use and size of wood structures have increased the research on developing special types of wood products supported by composite materials. Laminated wood elements are the leading composite wood materials. Laminated wooden beams allow making much larger openings than standard solid wood structural elements. The development of the sizes and usage areas of wooden structures has increased the capacity of glulam structural elements and reveals the need to improve their performance. Carbon fiber reinforced polymers (CFRPs) are the most suitable options for increasing the bearing capacity values of glulam beams and improving general load-displacement behaviors. In this study, the use of CFRP strips in different layouts to increase glulam wooden beams and the application of CFRP fan-type anchors in the CFRP strip endpoints are the studied variables. Anchored and non-anchored glulam wooden beams reinforced with CFRP strips with different layouts were tested using a three-point bending test. The ultimate load capacity, initial stiffness, displacement ductility ratio, energy dissipation capacity, failure mechanisms, and general load-displacement behavior of wooden beam test specimens were obtained and interpreted as a result of the experiments.