Scopus İndeksli Yayınlar Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/8651
Browse
3 results
Search Results
Article Enhancing Efficiency of an Old Hydropower Plant Turbine Through a Mutual Runner Design and Component Optimization(Sage Publications Ltd, 2025) Seydim, Sila; Yildirim, Gozde; Ulucak, Oguzhan; Buyuksolak, Fevzi; Ejder, Beril; Kantar, Ece Nil; Celebioglu, KutayThis paper presents a systematic approach to the rehabilitation process of Sar & imath;yar HEPP, a hydroelectric power plant that has been operational for more than 50 years. Units 1 and 2 (U1-U2) were originally designed with a head of 93 m and a turbine power of 48.5 MW, while Units 3 and 4 (U3-U4) were designed with a lower head of 76.5 m but the same turbine power of 48.5 MW. A methodology combining reverse engineering and CFD analysis is developed to identify and evaluate the critical parameters that have an impact on the existing turbine performance. A hybrid design is proposed to replace the existing two different types of turbines, which reduces manufacturing costs and design time. The performance of the new hybrid design is evaluated in detail with CFD analysis. For both existing and hybrid design, steady and unsteady analyses are performed. For all of the situations hill charts are obtained and the comparison of the old and new hybrid design is discussed in detail. The results show that the new design has improved the efficiency of the turbine and the power plant, resulting in a 14.2% efficiency increase in U1-U2 and a 21% system efficiency improvement in U3-U4. This study provides a guide to designers and practitioners for the rehabilitation of hydroelectric power plants.Article Citation - WoS: 2Citation - Scopus: 1Exploring the Potential of Artificial Intelligence Tools in Enhancing the Performance of an Inline Pipe Turbine(Sage Publications Ltd, 2024) Celebioglu, Kutay; Ayli, Ece; Cetinturk, Huseyin; Tascioglu, Yigit; Aradag, SelinIn this study, investigations were conducted using computational fluid dynamics (CFD) to assess the applicability of a Francis-type water turbine within a pipe. The objective of the study is to determine the feasibility of implementing a turbine within a pipe and enhance its performance values within the operating range. The turbine within the pipe occupies significantly less space in hydroelectric power plants since a spiral casing is not used to distribute the flow to stationary vanes. Consequently, production and assembly costs can be reduced. Hence, there is a broad scope for application, particularly in small and medium-scale hydroelectric power plants. According to the results, the efficiency value increases on average by approximately 1.5% compared to conventional design, and it operates with higher efficiencies over a wider flow rate range. In the second part of the study, machine learning was employed for the efficiency prediction of an inline-type turbine. An appropriate Artificial Neural Network (ANN) architecture was initially obtained, with the Bayesian Regularization training algorithm proving to be the best approach for this type of problem. When the suitable ANN architecture was utilized, the prediction was found to be in good agreement with CFD, with an root mean squared error value of 0.194. An R2 value of 0.99631 was achieved with the appropriate ANN architecture.Article Citation - WoS: 4Citation - Scopus: 4Investigation of Aerodynamic and Aeroacoustic Behavior of Bio-Inspired Airfoils With Numerical and Experimental Methods(Sage Publications Ltd, 2024) Kocak, Eyup; Aradag, Selin; Guzey, Kaan; Ayli, Ulku EceThis article presents numerical and experimental studies on the aerodynamic and aeroacoustic characteristics of the NACA0012 profile with owl-inspired leading-edge serrations for aeroacoustic control. The leading-edge serrations under investigation are in a sinusoidal profile with two main design parameters of wavelength and amplitude. The noise-suppressing ability of sinusoidal serrations is a function of several parameters such as amplitude, wavelength, inflow speed, angle of attack, which are examined in this study. Amplitude (A) and wavelength (& lambda;) of the serration are varied between 1.25 and 2.5, 20 < & lambda; < 60, respectively. The corresponding Reynolds numbers are between 1 and 3 x 10(5). The angle of attack for each configuration is changed between 4 & DEG; and 16 & DEG;. Forty different configurations are tested. According to the results, owl-inspired leading-edge serrations can be used as aeroacoustic control add-ons in blade designs for wind turbines, aircraft, and fluid machinery. Results show that the narrower and sharper serrations have a better noise reduction effect. Overall sound pressure level (SPL) reduces up to 20% for the configuration with the largest amplitude and smaller wavelength. The results also showed that serration amplitude had a distinct effect on aeroacoustic performance, whereas wavelength is a function of amplitude. At the smaller angle of attack values, AOA < 8 & DEG;, the lift and drag coefficients are almost the same for both clean and wavy profiles. On the other hand, typically for angle of attack values more than 12 & DEG; (after stall), when the angle of attack is increased, serration adversely affects aerodynamic performance.