İnşaat Mühendisliği Bölümü Yayın Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/395
Browse
4 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Experimental Study on the Interaction Between Bridge Pier and Abutment Concerning Clear-Water Local Scour(Springer int Publ Ag, 2023) Akbulut, Omer Faruk; Kokpinar, Mehmet Ali; Gogus, MustafaEstimation of scour depth around bridge piers and abutments is essential for safety and economic design in alluvial rivers. Although local scour around bridge piers and abutments has been studied separately by a large number of investigators, there is limited research on the literature related to the interaction between these two structures. Hence, in this study, the aim is to investigate the interaction between bridge abutments and pier scours in detail. For this reason, bridge abutments of different lengths of La = 0.05, 0.10, and 0.15 m and a pier with diameter of D = 0.1 m were placed at various distances from each other in a long sediment channel and tested under clear-water flow conditions with constant flow intensity. All the important dimensionless parameters involved in the interaction phenomenon were derived from theoretical analysis, and the relationships between them were investigated. Analysis of the data showed that the presence of a pier in the flow medium in addition to an abutment has a certain amount of influence on the formation of scour holes around the structures. The influence of the abutment on the pier was more noticeable in the current study, particularly for longer abutments, leading to average increases of up to 20% in scour depth around the pier. The study's findings revealed that the presence of both a pier and an abutment in the flow medium exerted a discernible, unfavorable influence on the development of scour holes, particularly around piers.Article Citation - WoS: 3Citation - Scopus: 3Numerical and Experimental Modelling of Flow at Tyrolean Weirs(Elsevier Sci Ltd, 2021) Yildiz, Ali; Marti, Ali Ihsan; Gogus, MustafaIn this study, a small-scaled Tyrolean weir model was constructed in the laboratory environment and a series of experiments were conducted on it, for two different rack inclinations (theta(1) = 18 degrees and theta(2) = 25 degrees) and three different bar spacings (e(1) = 3 mm, e(2) = 6 mm and e(3) = 10 mm) for a range of upstream flow discharges. The flow rates passing through the racks and going downstream over the racks were measured. Empirical equations for the discharge coefficient and water capture capacity of the Tyrolean weirs were determined by applying dimensional analysis to the parameters involved in the phenomenon. The related dimensionless parameters were presented with graphs and empirical equations for discharge coefficients were derived, coefficient of determination R-2 of equations for theta(1) = 18 degrees and theta(2) = 25 degrees are found 0.838 and 0.825 respectively. According to results obtained from experimental data, C-d increases as the Froude number ((F-r)(e)) between bars increases and water capture capacity [(q(w))(i)/(q(w))(T)] of the racks decreases with increasing ((F-r)(e)). Also, a numerical model of the Tyrolean weir was generated by using Flow-3D software and it was shown that the results of the numerical analysis were very consistent with the physical model results at large bar spacing such as e = 10 mm. As the bar spacing (e) reduces, the success of the numerical model giving consistent results with physical model is decreasing.Article Citation - WoS: 2Citation - Scopus: 2Hydraulics of Circular Bottom Intake Orifices(Wiley, 2021) Gogus, Mustafa; Bulut, Muhammed; Ucar, MuhammedIn this study, the hydraulic characteristics of circular bottom intake orifices were investigated in a hydraulic model. The structure diverts the river-flow to a hydroelectric power plant through circular orifices located at the bottom of the channel. In the model, a series of circular holes of various diameters and locations at the bottom of a channel in the form of single and multiple holes were tested for different flowrates and screen angles (theta) to determine the flow diverting capacity of them. Discharges passing through orifices at known locations (x) and diameters (d) and screen slopes (theta) were measured and recorded along with the related main channel flow rates and depths (h). Using the dimensional analysis approach, an expression for the flow rate diverted from the main channel was derived as a function of related parameters, and their variations with each other were presented graphically and empirical equations were determined. Referring to the graphs and empirical equations, one can determine the discharge capacity of single and multiple intake orifices, which is important to calculate the amount of flow to be diverted from the main channel within the ranges of the related parameters used in this study.Article Citation - WoS: 9Citation - Scopus: 10Effect of Collars on the Downstream Movement of the Maximum Scour Depth Location Around Bridge Abutments and Piers(Springer int Publ Ag, 2022) Kumcu, Serife Yurdagul; Kokpinar, Mehmet Ali; Gogus, MustafaA detailed investigation has been conducted to study the shift location of the point of the maximum scour depth for both bridge abutment-collar and pier-collar arrangements. In the present study, an experimental program has been conducted for abutment-collar arrangements and additionally, the data obtained from the literature for the pier-collar arrangements have been revisited and analyzed to complement the framework of this study. For the abutment-collar arrangements, a series of experiments under clear-water conditions were carried out for different abutment lengths with fixed values of collar location and collar width. For pier-collar arrangements, data used from the literature have been involved constant pier diameter with various collar sizes at various elevations. To describe the locations of these maximum scour depths, their coordinates with respect to the location of the abutment or the pier were obtained. Results from this investigation showed that when a collar placed on or below the bed level was used as a countermeasure against scouring, either on an abutment or on a pier, it was observed that the maximum scour depth was routed downstream of the bridge structure.