İnşaat Mühendisliği Bölümü Yayın Koleksiyonu
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12416/395
Browse
2 results
Search Results
Article Frame Finite Element Model for Nonlinear and Vibration Analysis of Steel Structures With Beam-Column and Column-Base Semi-Rigid Connections(Gazi Univ, Fac Engineering Architecture, 2022) Saritas, Afsin; Ozel, Halil FiratIn this paper, a shear deformable force-based frame finite element with semi-rigid connections is derived for nonlinear analysis of steel structures. Distributed plasticity approach is defined along element length and section depth, and linear or non-linear semi-rigid connection behavior can be specified anywhere along elements without the necessity to define additional nodes and to increase the degrees of freedom of the structural system. To perform vibration analyses with similar accuracy, force-based consistent mass matrix is used considering semi-rigidity in connections and an appropriate shear correction coefficient for I-sections. The element formulation is presented in 2 dimensions to simplify the formulation, and numerical validation and comparison studies are carried out on complex and irregular structures in 2-D and 3-D. In models with semi-rigid connections, the effect of nonlinear behavior on the structural system has been studied in both beam-column and column-bases. In the presented examples, it was possible to push structures higher than the existing displacements, and it was revealed that the nonlinear behavior in the column-base connections could create much more critical results for the structural systems with P-Delta effects. In addition, high-level accuracy results were obtained when performing vibration analyses with the application of force-based consistent mass matrix.Article Farklı Savak Yüksekliğine ve Konfigürasyona Sahip Dairesel Labirent Savakların Deneysel Modellenmesi(Gumushane University, 2023) Yildiz, A.; Marti, A.İ.; Göğüş, M.Due to their zigzag geometry in plain view, labyrinth weirs require less crest length compared to linear weirs in the dam body or in the channels where they are placed. In this study, the effect of the number of cycles (N) and weir heights (P) of the semi-circular labyrinth weirs on the flow efficiency was investigated. Semi-circular labyrinth weirs, unlike triangular and trapezoidal labyrinth weirs, increase the discharge efficiency by making the areas that reduce the flow capacity at the intersection areas more efficient and by allowing the flow to move in a more perpendicular direction to the weir walls. The experiments were carried out on 3 different configurations (N=2, 3 and 4) depending on the number of semi-circles they contain. In all configurations, a total of 3 weir heights (P=0.20, 0.30 m and 0.40 m) were used and 9 test setups were prepared. In addition, to reference the results obtained from circular weirs, experiments were carried out with linear weirs at 3 different weir heights (P=0.20, 0.30 m and 0.40 m), and a total of 12 experiments were carried out. n this study, the effect of the number of cycles (N) and weir heights (P) of the semicircular labyrinth weirs on the discharge efficiency was investigated. The results obtained from the circular labyrinth weir experiments were compared with previous studies and it was seen that the semi-circular labyrinth weirs had higher discharge capacity than the triangular labyrinth weirs. In addition, semi-circular labyrinth weirs provided a longer effective crest length than the triangular form with the same channel width, they provide higher flow rates at the same weir load. © 2023, Gumushane University. All rights reserved.